-
Dec 09, 2025
What is GR2 titanium material? Titanium Grade 2 is a pure alpha titanium and is the most widely used titanium alloy in all product forms for industrial service because of modera...
-
Nov 27, 2025
Understanding Titanium Grades Available For Various Applications
Commercially Pure (CP) Titanium Grades Commercially pure titanium contains no alloying elements, with four principal grades available. The difference in these grades is brought ...
-
Aug 13, 2025
The Four Most Common Nondestructive Testing Methods
Nondestructive testing (NDT) is a general term for all technical methods that utilize acoustic, optical, magnetic, and electrical properties to detect defects or unevenness in a...
-
Aug 13, 2025
Manual Welding Technology Of Titanium Alloy Conduits
Titanium alloy has the characteristics of low density, high strength and corrosion resistance. As a new type of material, titanium alloy pipes are widely used in the aerospace f...
-
Aug 13, 2025
Performance Analysis Of Titanium Alloy Forgings And Castings
Forging improves the microstructure and mechanical properties of metals. After hot working and deformation through forging, the cast structure undergoes deformation and recrysta...
-
Aug 13, 2025
What Are The Forging Methods For Titanium?
Forging is a forming process that applies external forces to titanium metal billets (excluding sheet metal) to cause plastic deformation, change size and shape, and improve perf...
-
Aug 13, 2025
Analysis Of The Causes Of Cold-Rolled Cracking in TA18 Titanium Alloy Tubes
TA18 (Ti-3Al-2.5V) titanium alloy is a low-aluminum equivalent, near-alpha-type, α+β-type titanium alloy derived from TC4 (Ti-6Al-4V) titanium alloy. It not only exhi...
-
Aug 13, 2025
Various Methods Of Titanium Forging
Forging is a forming process that applies external forces to titanium metal billets (excluding sheet metal) to cause plastic deformation, change size and shape, and improve perf...
-
Aug 13, 2025
Characteristics Of Hot Extrusion Process Of Titanium And Titanium Alloy Mater...
The thermal conductivity of titanium and titanium alloy billets is low, which will cause a large temperature difference between the surface and the inner layer during hot extrus...
-
Aug 13, 2025
Some Methods For Precision Machining Of Titanium Alloys
It's well known that precision machining in the aerospace industry places very high demands on materials. This is partly due to the specific requirements of aviation equipme...
-
Aug 13, 2025
Research On The Cold Working Properties Of Titanium
Titanium tubes are made of industrially pure titanium, grade TA2. According to the GB/T3624-2010 standard, the allowable outer diameter deviation of the tube is ±0.65mm, ...
-
Aug 13, 2025
Discussion On Precision Machining Of Titanium Alloys
Due to titanium alloy's low deformation coefficient, high cutting temperatures, high tool tip stress, and severe work hardening, cutting tools are prone to wear and chipping...