Titanium Ti-6Al-4V (Grade 5), Annealed
Jan 15, 2026
What is GR5 titanium?
Applications: Blades, discs, rings, airframes, fasteners, components. Vessels, cases, hubs, forgings. Biomedical implants.
Biocompatibility: Excellent, especially when direct contact with tissue or bone is required. Ti-6Al-4V's poor shear strength makes it undesirable for bone screws or plates. It also has poor surface wear properties and tends to seize when in sliding contact with itself and other metals. Surface treatments such as nitriding and oxidizing can improve the surface wear properties.
Inquire about GR5 pricing and samples
Products Description
| Component | Wt. % |
| Al | 6 |
| Fe | Max 0.25 |
| O | Max 0.2 |
| Ti | 90 |
| V | 4 |
Physical Properties
| Physical Properties | Metric | English |
| Density | 4.43 g/cc | 0.16 lb/in³ |
Mechanical Properties
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile Strength, Ultimate | 950 MPa | 138000 psi | |
| Tensile Strength, Yield | 880 MPa | 128000 psi | |
| Elongation at Break | 14 % | 14 % | |
| Reduction of Area | 36 % | 36 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
Electrical Properties
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.3e-006 | 3.3e-006 | cgs/g |
Thermal Properties
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F |
Our product range
| Product Category | Product Form | Common Grades / Alloys | Applicable Standards (Examples) |
|---|---|---|---|
| Titanium Tubes | Seamless & Welded Tubes | • CP (Commercially Pure): Gr1, Gr2, Gr3 • Alloys: Ti-6Al-4V (Gr5), Ti-3Al-2.5V (Gr9) |
ASTM B337, B338 ASME SB338 DIN 17860, 17861 GB/T 3624, 3625 |
| Titanium Bars | Round, Hexagon, Square Bars | • CP: Gr1, Gr2, Gr4 • Alloys: Ti-6Al-4V (Gr5), Ti-6Al-4V ELI |
ASTM B348 ASME SB348 AMS 4928 GB/T 2965 |
| Titanium Plates/Sheets | Plates, Sheets, Strips | • CP: Gr1, Gr2, Gr3, Gr4 • Alloys: Ti-6Al-4V (Gr5), Ti-6Al-4V ELI, Ti-15V-3Cr-3Sn-3Al (Gr21) |
ASTM B265 ASME SB265 AMS 4911 GB/T 3621 |
| Titanium Wires | Coils, Straight Lengths | • CP: Gr1, Gr2, Gr4 • Alloys: Ti-6Al-4V (Gr5) • Specialty: Ti-Ni Shape Memory Alloy (on request) |
ASTM F67, B863 AMS 4954 GB/T 3623 |
| Titanium Foils | Thin Foils, Ultra-thin Strips | • CP: Gr1, Gr2 (most common) | ASTM B265 (for thinner gauges) Custom specifications |
Our factory
why choose our products
Our factory is a specialized and integrated manufacturer dedicated to titanium and titanium alloy products. Equipped with advanced precision forging, rolling, drawing, and heat treatment lines, we produce a complete range of forms including tubes, bars, plates/sheets, wires, and foils. We strictly adhere to international standards such as ASTM, ASME, and GB, utilizing grades from CP (Gr1, Gr2) to high-performance alloys like Ti-6Al-4V (Gr5). Our core strength lies in our stringent process control from raw material to finished product, supported by a fully-equipped in-house laboratory for metallurgical and mechanical testing. This integrated system ensures exceptional quality, consistency, and reliability for our customers in aerospace, medical, chemical processing, and other high-tech industries.
