Titanium tube heat exchanger in the field of petroleum accessories applications

Under the conditions of petroleum mechanical processing, titanium alloys can be used to manufacture the following titanium equipment: titanium heat exchangers, filters (precipitators), tanks for storing petroleum and petroleum products, locking devices, sewage pipelines and rough oil pipelines.
Certain petrochemical enterprises and the oil-processing industry have experience in the manufacture and use of titanium alloy equipment.
For evaporation (concentration) or distillation or in the weak acid or other chloride-containing solutions for the reaction and so on can be used with titanium lined containers, and then for the use of nitric acid on the nitriding of organic materials and for other with the oxidizing medium for the chemical reaction of the containers used can be used with titanium lined containers. Titanium-lined containers can be used for chromic acid solutions and sulfurized chromic acid solutions, depending on the reaction temperature.
In a certain range of applications in the chemical raw materials industry, it has been demonstrated that copper and other gas-containing solutions can be used as catalysts for the catalytic oxidation of chlorocarbons at a defined pH value. When catalyzing at temperatures of about 150 to 200 t:, appropriate equipment must be installed, and titanium is widely used in acetaldehyde production equipment. Towers, piping, valves utilizing titanium as a liner, and acid pumps employing a rotor and stator are made of engineered pure titanium. Acetic acid purification often uses distillation columns, and most of the assembly included in the fractionation stage is made of titanium. For example, the middle layer of the tower and the connecting parts for the distillation unit.

Serpentine tube heaters, which prevent the formation of metal sulfates, have been tested to increase heat transfer by 30% compared to aluminum-plated copper serpentine tube heaters. For urea reactor, in order to obtain (recovery) carbon black and in order to eliminate stress, to withstand 120T: temperature and 130kPa pressure of 43m in diameter and length of 8.2m of the reactor tower, the reactor tower to reduce the pressure of the gas and other gases, this equipment is made of titanium.
Titanium's field of application is further extended to the crude oil and petroleum processing industry, from seawater to fresh water or drinking water desalination equipment or organic acid production equipment are used titanium. At the same time, pumps and conduits and heat exchangers made from welded titanium tubes are proven to be reliable and durable. Titanium plates are used in the electrolysis of copper to make titanium seed plates for cathodes.