Distribution of Molybdenum Resources in China: Deposits, Provinces and Downstream Forms

Feb 06, 2024

Molybdenum enters the supply chain as molybdenite, the sulphide mineral MoS2, which contains about 60 percent molybdenum by mass in its pure form. Very little of the world's molybdenum is mined as a primary product. Most of it is recovered as a by-product of porphyry copper operations, where molybdenite is separated from copper concentrate by flotation, and that fact governs both the economics and the geography of supply. China is one of the few countries where large primary molybdenum deposits are worked in their own right.

Reported Reserve Base and Provincial Distribution

Chinese published reserve figures place retained molybdenum reserves at approximately 8.4 million tonnes of contained metal, ranking the country second globally, with proven reserves identified across more than 200 mining areas in 28 provinces, autonomous regions and municipalities. Henan province holds the largest share, reported at about 30 percent of the national total, followed by Shaanxi and Jilin. Together the three provinces account for a reported share above 56 percent of national reserves.

Region Representative deposit area Deposit setting Role in supply
Henan Luanchuan district Porphyry and carbonatite-related Largest single reserve base and concentrate output
Shaanxi Jinduicheng, Weinan area Porphyry Long-established mining and processing centre
Jilin Daheishan Porphyry Major northern production base
Liaoning Yangjiazhangzi Skarn-related Integrated mining and smelting history
Other provinces Scattered occurrences Various Smaller and often copper-associated output

The Jinduicheng deposit in Shaanxi was discovered in 1955, reached large-scale mining in the 1965 to 1983 period and remains one of the best known primary molybdenum districts in the country. Luanchuan in Henan developed later but now supports the largest concentrated reserve base. Reported reserve and output shares move with each national resource survey and with changes in cut-off grade, so a procurement assessment should be based on the latest published statistics rather than on figures carried forward from earlier years.

Deposit Types and What They Mean for Supply

Porphyry deposits dominate, hosting fine-grained molybdenite disseminated through altered granitic rock. They are large, low grade and highly amenable to bulk mining, which makes them the backbone of primary supply. Skarn-related occurrences, such as those in Liaoning, carry higher grades and sometimes elevated rhenium values that add by-product revenue. Carbonatite and vein-type occurrences exist but contribute less volume. Because porphyry deposits are frequently copper-bearing, a fall in copper output can reduce molybdenum concentrate availability even when molybdenum prices are strong, an effect that buyers should factor into long-term planning.

From Ore to Wrought Product

Molybdenite concentrate is roasted in air at around 550 to 650 degrees Celsius to drive off sulphur and produce technical grade molybdenum trioxide, which then serves two markets. The larger market is metallurgical, where the oxide is used for alloying steel and cast iron. The smaller and higher-value route purifies the trioxide, dissolves it in ammonia, crystallises ammonium molybdate and reduces it in hydrogen at 1000 to 1100 degrees Celsius to metallic molybdenum powder. Powder metallurgy then takes over, because molybdenum's melting point of 2623 degrees Celsius makes conventional melt processing impractical for most mill forms.

Unalloyed molybdenum in the wrought form is covered by ASTM B386 for plate, sheet, strip and foil, ASTM B387 for bar, rod and wire, and by Chinese specifications including GB/T 3462 for molybdenum bars and GB/T 3461 for molybdenum powder. Powder is compacted and sintered, then hot rolled or swaged to the ordered form, with stress relief and recrystallisation control setting the room-temperature ductility.

Properties That Drive Industrial Demand

Molybdenum has a density near 10.2 grams per cubic centimetre, a coefficient of thermal expansion of about 4.8 parts per million per kelvin, an elastic modulus around 329 GPa and thermal conductivity near 138 watts per metre kelvin. It keeps useful strength above 1000 degrees Celsius in a reducing or vacuum atmosphere, which is why it appears in furnace hearth fixtures, glass melting electrodes, sputtering targets, ion implantation components and high-temperature dies. Its very low coefficient of thermal expansion relative to most metals is a design constraint as well as an advantage: joining molybdenum to steel or copper creates significant interfacial stress, so bolted or brazed assemblies need careful joint design.

The other industrial reality is oxidation. Molybdenum begins to oxidise rapidly in air above roughly 600 to 700 degrees Celsius, forming volatile trioxide that offers no protective barrier. Every high-temperature installation therefore depends on vacuum, hydrogen, nitrogen or an applied coating, and the specification of that atmosphere is as important as the specification of the metal itself.

Frequently Asked Questions

Q: Is most Chinese molybdenum a primary product or a by-product?
A: Both routes operate at scale. Several large primary deposits are mined for molybdenum itself, while many smaller occurrences are recovered alongside copper or tungsten. National supply therefore responds to changes in base metal output as well as to molybdenum demand.

Q: Why is molybdenum product made by powder metallurgy rather than melting and casting?
A: Melting requires temperatures above 2600 degrees Celsius and clean crucible materials, and the resulting ingot has a coarse cast structure. Powder compaction and sintering followed by hot working is more economical and yields the fine, uniform grain structure that gives useful room-temperature ductility.

Q: What is the practical maximum service temperature in air?
A: Uncoated molybdenum should not be used continuously in air above roughly 600 to 700 degrees Celsius because volatile oxide forms and the section is consumed. In vacuum, hydrogen or inert gas, useful strength is retained well above 1000 degrees Celsius.

Q: Which product forms are covered by ASTM B386 and ASTM B387?
A: ASTM B386 covers plate, sheet, strip and foil, and ASTM B387 covers bar, rod and wire. Buyers should confirm the applicable specification against the ordered form, because testing schedules such as bend, hardness and dimensional tolerance differ between flat and long products.

Q: Does rhenium content matter in molybdenum purchasing?
A: It can. Molybdenum concentrate from certain deposits carries rhenium as a by-product, and rhenium-bearing grades are separately valued and sometimes separately recovered. Where a specification sets a maximum for rhenium it is usually driven by the customer's downstream alloying requirement.

Q: What is the most common cause of rejected molybdenum sheet?
A: Inadequate ductility, usually from improper thermomechanical processing or from residual oxygen and carbon forming grain boundary phases. Bend testing and hardness measurement on the finished sheet are the practical screens used to catch it before shipment.