Surface quality of titanium plates

1, the surface of the plate should be smooth and clean, the original color of the metal. The plate is allowed to be supplied with sandblasted surface;

2, the surface of the plate is allowed to have a slight darkening and local water stains; allowed to have localized, not exceeding half of the thickness tolerance scratches, indentations, pits and other defects, but should be small thickness;

3, the surface of the plate is not allowed to have cracks, skinning, oxidized skin, pressure folding, metal and non-metallic inclusions and other macro-defects and traces of alkaline washing;

4, the plate is allowed along the rolling direction clear local defects, but the thickness of the plate after removal shall not be less than the small allowable thickness;

5,When there are special requirements on the surface quality of the plate, it can be supplied through the negotiation between the supply and demand sides.