Thin titanium alloy sheets to be produced by cladding and stacking process
Mar 15, 2024
Titanium alloy has good room temperature, high temperature mechanical properties, excellent fatigue and crack expansion resistance, has been widely used in the manufacture of airships and missiles on the pressure vessel, rocket engine casing, aircraft skin, ribs, webs and other fields, is the astronautics, aerospace and defense industry is an important material. At present, the demand for titanium alloy sheet is increasing. In the face of market demand, with the rapid development of aviation and aerospace industry, as well as titanium alloy sheet superplastic forming a diffusion connection of the application of new technologies, the domestic demand for titanium alloy plate is growing.
Domestic production of titanium alloy sheet, most of the current method is still used for single-piece rolling due to poor low-temperature plasticity of titanium alloy, cold deformation work hardening, the use of single-piece method of production of thin plate is extremely difficult. In order to make the rolling process smoothly, and reduce the temperature drop of the metal in the forging process, especially to reduce the billet surface cooling, forging titanium alloy mold needs to be preheated. Otherwise, the temperature drop of the metal and the surface cooling will make the metal can not fill the mold groove well and may lead to many cracks. Die preheating systems for titanium alloy forging are usually of the detachable type, but sometimes a press-mounted heating device is also used. The detachable die heating system is usually a gas heater, which slowly heats the die to the desired temperature range before the module is assembled to the forging machine. Solid actuated press mounted heaters are usually induction or resistance heaters.



According to statistics, in the production of TC4 titanium plate, alkali pickling and grinding caused by intangible losses of up to 3O% or so, the comprehensive yield is only about 35%, and the production cycle is long, unstable performance. Its cold rolling degree of deformation rate of not more than 25%, and the need for multiple cold rolling and intermediate annealing, alkali pickling, and in the rolling is prone to cracks, cracked edges, drop slag, pressure pit and other process defects. Titanium alloy plate (1.0mm or less) production process, titanium alloy cross-rolling and β-thermal process, independent research and development of stacked rolling and cladding rolling process, titanium and titanium alloy rolling technology, independent research and development of the atmosphere can be controlled to cool gravity creep straightening technology and other key technologies of a series of flow process. TC4 thin plate production of new process tests, has been used in the cladding and stacked rolling process to produce a 0.6mm-thick TC4 plate, now put into production in bulk. The new process of TC4 thin plate production has been tested, and the 0.6mm-thick TC4 thin plate has been produced by wrapping and stacking rolling process.







