Titanium Grade 5 Pipe: Seamless and Welded Forms

Jan 15, 2026

The Material: Ti-6Al-4V Pipe

Grade 5 is the alpha-beta titanium alloy with 5.5 to 6.75 percent aluminum and 3.5 to 4.5 percent vanadium, UNS R56400. It combines the highest strength of the common titanium pipe grades with the corrosion resistance inherent to titanium, at a density of about 4.43 grams per cubic centimeter. The alloy is available in seamless and welded pipe forms, with welding restricted to approved processes.

Because of its strength, Grade 5 pipe carries higher pressures with thinner walls than pure titanium, which is why it is specified for weight-critical systems. The alloy also maintains useful strength to elevated temperature, and its fatigue behaviour suits dynamic service such as hydraulic lines.

ASTM B861 Seamless Pipe

ASTM B861 covers seamless titanium pipe made by piercing and rolling or drawing a solid billet, with no longitudinal weld. The standard includes Grade 5 in its list of alloys, and seamless pipe is the preferred form for high-pressure service because the wall is uniform and free of weld joints. Size ranges in the standard run from small-bore tubing to large-diameter pipe.

Seamless production begins with forged billet, which is hot pierced, elongated over a mandrel and reduced to the finished dimensions. The pipe is annealed in the alpha-beta range, straightened, and finished by pickling or grinding. Straightness, wall thickness and concentricity are checked against the standard tolerances.

ASTM B862 Welded Pipe

ASTM B862 covers welded titanium pipe made by forming strip or plate and joining the longitudinal seam. For Grade 5, the weld must be made by a process that produces full weld quality, typically gas tungsten arc or plasma arc welding, and the weld zone must meet the same mechanical requirements as the base metal.

Welded pipe offers larger diameters and longer lengths than seamless at lower cost, and with the weld properly controlled, it performs equally in most services. The weld seam is examined by non-destructive testing, and the pipe can be cold worked or heat treated after welding to restore properties where required.

Mechanical Requirements and Testing

For Grade 5 pipe, the standard requires a minimum tensile strength of 895 MPa and yield strength of 828 MPa, with elongation of at least 10 percent. Chemical analysis verifies the composition, and tensile testing is performed on each heat. Flattening and flaring tests check the ductility of the pipe wall.

Non-destructive examination completes the qualification. Hydrostatic or pneumatic pressure testing proves leak tightness, eddy current testing scans the full length for surface and near-surface flaws, and ultrasonic testing verifies wall thickness and detects internal defects. Radiography is added for critical welded pipe.

Applications and Selection

Grade 5 pipe serves aerospace hydraulic and pneumatic systems, where its strength saves weight in aircraft plumbing; marine and offshore systems, where corrosion resistance and strength combine; and chemical plants handling high-pressure corrosive fluids. The same alloy appears in oil and gas completion equipment and high-performance automotive systems.

Selection between seamless and welded forms follows the service. For high pressure, small bores and maximum reliability, seamless pipe is the standard answer. For large diameters, long runs and cost-sensitive installations, welded pipe offers an economical alternative that meets the same mechanical specification.

Frequently Asked Questions

Q: Which standards cover Grade 5 titanium pipe?

A: ASTM B861 for seamless pipe and ASTM B862 for welded pipe, with both including Grade 5, UNS R56400.

Q: What strength does Grade 5 pipe guarantee?

A: Minimum tensile strength of 895 MPa and yield strength of 828 MPa, with at least 10 percent elongation.

Q: What is the difference between seamless and welded Grade 5 pipe?

A: Seamless pipe is formed from solid billet with no longitudinal seam; welded pipe is formed from strip and joined by a welded seam.

Q: Can Grade 5 pipe be used for high pressure?

A: Yes, its high strength allows thinner walls and higher working pressures than pure titanium pipe.

Q: How is the weld seam of Grade 5 pipe tested?

A: By non-destructive examination including eddy current and ultrasonic testing, plus hydrostatic pressure testing of the finished pipe.

Q: What is the density of Grade 5 pipe?

A: About 4.43 grams per cubic centimeter, roughly half the density of steel pipe of the same strength class.