Introduction To The Manufacturing Process Of Titanium Plates

Titanium plate manufacturing process.
1, hot forging: in the metal recrystallization temperature above the forging process. 2, hot rolling: in higher than the recrystallization temperature of the rolling process. 3, cold rolling: plastic deformation temperature is lower than the recovery temperature of the rolling process.
4, annealing: the metal slowly heated to a specific temperature, keep enough time, and then cooled at a suitable rate (usually slow cooling, sometimes controlled cooling) of a metal heat treatment process.

5, pickling: the workpiece will be immersed in sulfuric acid and other aqueous solutions, in order to remove the surface of the titanium plate metal oxide film. Is electroplating, enameling, rolling and other processes of pretreatment or intermediate treatment.