ASTM B265 Grade 1 Titanium Sheet

ASTM B265 Grade 1 titanium sheet is titanium sheet that meets ASTM B265 standards with a thickness of 0.187 inches (4.75 mm) and less and a width of 24 inches (610 mm) and more.

Grade 1 titanium is widely used in the following fields:
Aerospace: It can be used to manufacture aircraft structural parts, engine parts, wing connectors, etc., while reducing the weight of the aircraft, it can meet the requirements of high strength and high corrosion resistance of materials in the aerospace field.
Medical equipment: Due to its good biocompatibility and corrosion resistance, it is often used to manufacture artificial joints, implants, dental instruments, surgical instruments, etc.
Chemical industry: It is used to manufacture pipes, valves, heat exchangers, reactors, etc. of chemical equipment, and can resist corrosion from chemical media.
Marine engineering: It is suitable for manufacturing structural parts of offshore platforms, seawater desalination equipment, parts of marine ships, etc., and can resist erosion from seawater.
Sports goods: It can be used to manufacture sports equipment such as golf clubs, bicycle parts, tennis rackets, etc., and improve the performance of sports equipment by taking advantage of its light weight and high strength.

Get Detailed Technical Data

 

Chemistry Requirements:

O	N	C	H	Fe	Residuals Each Max.	Residuals Max. Total	Ti
0.18	0.03	0.08	0.015	0.20	0.1	0.4	balance

Minimum Tensile Properties:

Condition	UTS ksi (Mpa)	0.2%YS ksi (MPA)	% El.	% RA*
As specified (shape)	35 (240)	20 (138)	24	30

Typical Tensile Properties:

Condition	UTS ksi (Mpa)	0.2%YS ksi (MPA)	% El.	% RA*
As provided	50 (345)	32(221)	37	-

Industry	Typical Applications	Recommended Thickness
Chemical Processing	Reactor linings, Heat exchanger plates, Tower internals	2-10 mm
Marine Engineering	Ship hull plates, Offshore platform components, Desalination plant parts	3-20 mm
Power Generation	Condenser plates, FGD system components, Cooling system parts	1.5-8 mm
Pharmaceutical	Process vessel linings, Piping systems, Storage tanks	1-6 mm
Architecture	Roofing, Cladding panels, Decorative elements	0.8-3 mm

 

Capability	Key Processes & Expertise
Precision Machining	CNC milling, turning, drilling & tapping. Utilizing sharp tooling, optimized feeds/speeds, and dedicated coolants to overcome GR1's "gummy" nature and achieve tight tolerances.
Forming & Fabrication	Cold rolling, deep drawing, press brake bending, hydroforming. Leveraging GR1's exceptional ductility for complex shapes with controlled springback.
Welding & Joining	High-purity argon GTAW (TIG) welding, laser welding. Full-trailing gas protection for oxide-free, corrosion-resistant welds. Post-weld stress relieving available.
Cutting & Blanking	High-definition plasma cutting, waterjet cutting, laser cutting. Delivering clean edges with minimal heat-affected zone for superior downstream processing.
Surface Finishing	Mechanical polishing (to mirror or satin), abrasive blasting, pickling (to ASTM/medical standards), passivation. Preparing surfaces for final use or coating.

Get Free Sample & Evaluation

 

What is GR1 Titanium?
GR1 (Grade 1) is commercially pure, unalloyed titanium with a minimum titanium content of 99.5%. It is the most ductile and corrosion-resistant grade among pure titanium alloys, making it ideal for applications where forming and corrosion resistance are critical.

 

Can GR1 titanium be welded?
Yes, GR1 has excellent weldability. Gas Tungsten Arc Welding (GTAW/TIG) with high-purity argon shielding is the standard method. Proper cleaning and shielding are essential to prevent oxidation and maintain corrosion resistance.

 

Does GR1 titanium work harden?
Yes, like most pure metals, GR1 can work-harden during cold forming or machining. Intermediate annealing may be required for severe deformation operations to restore ductility and prevent cracking.

 

Can GR1 be heat-treated for higher strength?
No, GR1 is a non-heat-treatable alloy. Its strength is derived from cold working. Annealing is the only thermal process used to relieve stresses and soften the material after cold working.

 

Is GR1 titanium suitable for medical implants?
Yes, GR1 is widely used for permanent and temporary medical implants (e.g., bone plates, screws, cranial meshes) due to its excellent biocompatibility, corrosion resistance in bodily fluids, and non-toxic nature.

 

How does GR1 compare to GR2 titanium?
GR1 has lower strength but higher ductility and corrosion resistance than GR2. GR2 is more widely used for general-purpose applications, while GR1 is chosen for the most demanding corrosive environments or where severe forming is required.

 

Product Form	Available Shapes / Types	Common Grades	Typical Dimensions (Range)	Standard Specifications
Titanium Tube & Pipe	- Seamless Pipe - Welded Pipe - Heat Exchanger Tubes (U-Tube, Straight) - Hydraulic & Instrumentation Tubing	GR1, GR2, GR7, GR9, GR12, GR5 (Ti-6Al-4V)	- OD: 1/8" to 12" (3mm - 325mm) - Wall Thickness: 0.028" to 1.0" (0.7mm - 25mm) - Length: Up to 20ft (6m) standard, custom lengths available	ASTM B337, B338, B861, B862 ASME SB337, SB338
Titanium Sheet & Plate	- Cold Rolled Sheet - Hot Rolled Plate - Checker Plate / Tread Plate	GR1, GR2, GR5, GR7, GR9, GR12	- Sheet Thickness: 0.016" to 0.187" (0.4mm - 4.7mm) - Plate Thickness: 0.187" to 4" (4.7mm - 100mm)+ - Width: Up to 60" (1500mm) - Length: Up to 240" (6000mm)	ASTM B265 ASME SB265
Titanium Bar & Rod	- Round Bar - Hex Bar - Square Bar - Forged Bar - Centerless Ground Bar	GR1, GR2, GR5, GR7, GR9, GR12	- Round Bar Diameter: 0.125" to 12" (3mm - 300mm) - Hex/Square: 0.125" to 4" (3mm - 100mm) - Length: Random, cut-to-length, or coils (small diameters)	ASTM B348 ASME SB348
Titanium Wire	- Coiled Welding Wire - Straight Length Wire - Spring Wire - Fastener Wire	GR1, GR2, GR5 (ELI for medical), GR7	- Diameter: 0.010" to 0.25" (0.25mm - 6.35mm) standard - Spool Weight: Standard 5lb, 10lb, 25lb spools; custom packaging available	ASTM B863, F67 (for medical)
Titanium Strip & Foil	- Cold Rolled Strip (Coil) - Precision Foil - Shim Stock	GR1, GR2, GR5	- Thickness (Strip): 0.004" to 0.125" (0.1mm - 3.1mm) - Thickness (Foil): 0.0005" to 0.004" (0.012mm - 0.1mm) - Width: Up to 24" (600mm)	ASTM B265 (strip/foil)

Discuss Your Project Requirements

 

Our factory is equipped with advanced production machinery, including CNC machining centers (3 to 5-axis), high-precision tube mills, cold rolling mills, automated wire drawing lines, and CNC-controlled cutting systems (laser, waterjet, and plasma). We maintain a Class 100,000 clean workshop for medical and aerospace production, supported by argon-protected welding bays, vacuum annealing furnaces, and full-spectrum quality testing labs with CMM, spectrometer, and ultrasonic testing equipment. From raw material to finished product, every step is executed under controlled conditions to ensure dimensional accuracy, metallurgical integrity, and compliance with international standards.

 

Our standard packaging protocol includes multiple protective layers tailored to the specific product form and customer requirements. All materials are first cleaned, dried, and wrapped with VCI (Vapor Corrosion Inhibitor) paper or PE film to prevent oxidation and surface contamination. Products are then securely bundled and cushioned with waterproof corrugated paper and edge protectors. Finished bundles are placed in plywood crates, heavy-duty cardboard boxes, or sealed in moisture-proof PVC film on pallets, with clear, durable labeling for handling and identification. For international sea freight, we offer IPPC-certified fumigation wooden cases or seaworthy export crates, ensuring your order arrives safely and in ready-to-use condition, no matter the destination.

Get Fast Quote & Logistics Plan

 

Hot Tags: astm b265 grade 1 titanium sheet, China astm b265 grade 1 titanium sheet manufacturers, suppliers, factory, Medical Titanium Bar, Pure Titanium Rod, Titanium Gr5 Straight Tubing, Titanium Steel Bar, Titanium Sheet 6AL4V Eli, Gr5 6al4v Alloy Titanium Wire