What Are the Commonly Used Tool Models for Machining Stainless Steel Parts?
Sep 11, 2025
Products Description
CNC Precision Machined Parts For Pipe Connections
CNC Metal Parts For The Petrochemical Industry
CNC Machined Parts For The Machinery
CNC Metal Parts For The New Energy Industry
Precision CNC Machined Metal Parts
Low-volume CNC Metal Prototype Parts
What Are the Commonly Used Tool Models for Machining Stainless Steel Parts?
I. Requirements for tool geometric parameters when machining stainless steel parts generally involve the selection of rake angle and relief angle. When selecting the rake angle, factors such as the chip breaker groove type, presence of a chamfer, and the magnitude of the positive or negative inclination angle must be considered. Regardless of the tool type, a larger rake angle must be selected when machining stainless steel.
The relief angle should not be too small, but also not too large. An excessively large relief angle reduces the tool's wedge angle, weakens the cutting edge strength, and accelerates tool wear. Typically, the relief angle should be appropriately larger than when machining ordinary carbon steel.
II. Requirements for the surface roughness of the tool's cutting part when machining stainless steel parts: Improving the surface smoothness of the tool's cutting part can reduce the resistance during chip formation and curling, thereby enhancing the tool's durability. Compared to machining ordinary carbon steel, cutting parameters should be appropriately reduced when machining stainless steel to slow down tool wear. Additionally, suitable cooling lubricants should be selected to reduce cutting heat and cutting forces during the process, extending the tool's service life.
III. Requirements for the tool shank material when machining stainless steel parts: The tool shank must possess sufficient strength and rigidity to prevent chatter and deformation during cutting. This requires selecting a tool shank with an appropriately large cross-sectional area and using materials with higher strength for manufacturing the shank, such as heat-treated 45# steel or 50# steel.
IV. Requirements for the material of the tool's cutting part when machining stainless steel parts: When machining stainless steel, the material of the tool's cutting part must have high wear resistance and maintain its cutting performance at elevated temperatures. Commonly used materials include high-speed steel and hard alloys.
V. Since high-speed steel can only maintain its cutting performance below 600°C, it is not suitable for high-speed cutting and is only applicable for machining stainless steel at low speeds. Hard alloys, due to their better heat resistance and wear resistance compared to high-speed steel, are more suitable for machining stainless steel when used in tools made from hard alloy materials.
To improve surface quality when machining stainless steel parts, hard alloy tools should be used for processing. The cutting parameters should be slightly lower than those for turning ordinary carbon steel workpieces, particularly the cutting speed, which should not be too high. Generally, the recommended cutting speed is Vc = 60–80 m/min, cutting depth ap = 4–7 mm, and feed rate f = 0.15–0.6 mm/r.
Titanium product forms available from GNEE
|
Grade |
GR1,GR2,GR3,GR5,GR6,GR7,GR9,GR11,GR12, etc. |
|
Standard |
ASTM B265,ASTM F136,ASTM F67,AMS4928 |
|
Size |
0.5-5.0mm x 1000mm x 2000-3500mm (Thickness x Width x Length) |
|
Application |
Metallurgy, electronics, machinery, medical treatment, chemical industry, petroleum, medical treatment, aerospace |
|
Supply status |
M (Y/ R/ ST) |
|
Feature |
High corrosion resistance, low density, good thermal stability |
|
Technics |
Hot Forged, Hot Rolled, Cold Rolled, Annealing, Pickling |
|
Surface |
Bright, Polished, Pickling, Acid cleaning, Sandblasting |
|
Packing |
Export Standard Woodcase |
|
Payment terms |
T/T, L/C, D/A, D/P, Escrow, Western Union, PayPal |
|
Certificate |
ISO 9001:2008; The third test report; TÜV Rheinland; |
|
Delivery time |
7-15days according to the quantity and process of the product |
|
Quality and test |
Hardness test, Bending test, Hydrostatic etc. |
|
Production Name |
Titanium Alloy Bar |
|||
|
Grade |
Gr1, Gr2, Gr3,Gr4,Gr5, Gr7, Gr6,Gr9, Gr11, Gr12 ,Gr16, Gr17,Gr25 |
|||
|
Size |
All sizes can be customized |
|||
|
Application |
Metallurgy, electronics, machinery, medical treatment, chemical industry, petroleum, medical treatment, aerospace |
|||
|
Feature |
High corrosion resistance, low density, good thermal stability |
|||
|
Technology |
Hot Forged, Hot Rolled, Cold Rolled, Annealing, Pickling |
|||
|
Surface |
Bright, Polished, Pickling, Acid cleaning, Sandblasting |
|||
|
Packing |
Export Standard Woodcase |
|||
|
Delivery time |
10-25days according to the quantity and process of the product |
|||
|
Quality and test |
Hardness test, Bending test, Hydrostatic etc. |
|||
|
Item Name
|
Titanium plate
|
|
Type
|
GR1, GR2, GR3, GR4, GR5, 6AL4V Eli, GR7, GR9, GR12, GR23,TB3, TB6, TC4, TC6, TC11, TC17, TC18
|
|
Standard
|
ASTM B265, AMS4911, AMS4911H, GB/T3621-2007
|
|
Specification
|
Hot Rolling: Length 1000-4000mm,Width 400-3000mm,Thickness 4.1-60mm
Cold Rolling :Length 1000-3000mm,Width 400-1500mm,Thickness 0.3-3.0mm |
|
Certificate
|
ISO 9001:2008
|
|
Supply Ability
|
10 Tons per Month
|
|
Delivery
|
Within 5~30 days
|
|
Grade
|
Grade 1: Pure Titanium, relatively low strength and high ductility.
Grade 2: The pure titanium most used. The best combination of strength, weldability. Grade 3: High strength Titanium, used for Matrix-plates in shell and tube heat exchangers. Grade 5: The most manufactured titanium alloy. Exceedingly high strength. high heat resistance. Grade 7: Superior corrosion resistance in reducing and oxidizing environments. Grade 9: Very high strength and corrosion resistance. Grade 12: Better heat resistance than pure Titanium. Applications as for Grade 7 and Grade 11. Grade 23: Titanium-6Aluminum- 4Vanadium ELI. Alloy for surgical implant application. |
|
Application
|
Metallurgy, electronics, medical, chemical, petroleum, aerospace, and others.
|
|
Length
|
Requied
|
|
Technology
|
Hot Rolled Plate (HR)
|
|
Packing
|
Standard Package
|
|
Product Name
|
High quality 0.1mm 0.2mm 0.3mm 0.4mm 0.5mm thin titanium wire price
|
|
Material
|
Pure titanium and Titanium alloy
|
|
|
GR1/GR2/GR3/Gr4/GR5/GR7/GR9/GR12/Gr5Eli/Gr23
ERTi-1/ERTi-2/ERTi-3/ERTi-4/ERTi-5Eli/ERTi-7/ERTi-9/ERTi-11/ERTi-12
Ti15333/Nitinol Alloy
|
|
Standard
|
AWS A5.16/ASTM B863/ASME SB863, ASTMF67, ASTM F136, ISO-5832-2(3) etc
|
|
Shape
|
Titanium Coil Wire/Titanium Spool Wire/Titanium Straight Wire
|
|
Wire Gauge
|
Dia(0.06--6) *L
|
|
Process
|
Bar billets-hot rolling-drawing-annealing-strength-pickling
|
|
Surface
|
Polishing, picking, acid washed, black oxide
|
|
Main Technique
|
Hot Forged; Hot Rolled; Cold drawn; Straighten etc
|
|
Material Milling Certificate
|
According to. EN 10204.3.1
Including Chemical composition and Mechanical property |
|
Application
|
Welding, Industry, Medical, Aerospace, Electronic etc
|
|
Processing
|
CNC Machining Services: CNC Milling, CNC Turning, Laser Cutting,drilling ,Bending, Spining, Wire Cutting, Stamping, Electric
Discharge Machining (EDM) 3-axis-4-axis-5-axis Machining, Comprehensive Processing Services: Sheet Metal fabrication, Stamping, Die Casting, 3D Printing, Injection Molding Rapid Prototype,Moulds etc,Multistep Machining |
|
Assembly Services
|
Fastening & Splicing, Component Assembly, Full Assembly, Packaging & Labeling
|
|
The materials we can process are• Material
|
Aluminum, Stainless Steel, Titanium ,Barss,Copper,Plastic,Alloy Custom material
|
|
Precision Tolerance
|
±0.001mm~±0.005mm
|
|
Surface Roughness
|
Min Ra 0.1~3.2
|
|
Surface Treatment
|
Anodized, Bead Blasted, Silk Screen, PVD Plating, Zinc/Nickl/Chrome/Titanium Plating, Brushing, Painting, Powder Coated,
sandblasting ,Passivation, Electrophoresis, Electro Polishing, Knurl, Laser/Etch/Engrave etc. |
|
Production volume
|
Low to Medium Volume, Prototype, and Batch Production
|
|
Processing Method
|
Custom According to Provided CAD Drawings
|
|
Lead Time
|
Short lead Time, Typically 1-4 Weeks
|
|
Quality Control
|
Strict Quality Assurance and Inspection Processes
|
|
Packaging
|
Secure Packaging to Prevent Damage During Transit
|
|
Certificate
|
ISO9001,AS9100D,ISO45001,ISO14001,ROSH,CE etc.
|
|
1-Piece minimum order
|
Ability to Provide Samples Before Mass Production
|
|
Customized Precision Parts
|
We Look Forward to Receiving Your Customized Requirements and Establishing a Fruitful Partnership.
|
GNEE is a specialized manufacturer and exporter of high-quality titanium products, including pipes, sheets, bars, wires, and fabricated parts.
We utilize advanced CNC machining, rolling, and welding equipment to ensure precision manufacturing. All products undergo strict chemical, mechanical, and non-destructive testing to guarantee compliance with international standards.
Our export-safe packaging includes wooden crates and waterproof wrapping to ensure secure delivery. If you have any needs, please feel free to contact us immediately：info@gneemetal.com
8000+
