Products

Gr1 Titanium Pipe For Skeleton And Skin Of Aircraft

Gr1 grade titanium tubing is widely used in the aerospace industry for aircraft frames and skins due to its excellent properties.

EN 10204.3.1 Thin Grade 2 Titanium Sheet

Grade 2 thin titanium plates are used in the medical field for the manufacture of surgical implants such as bone plates, bone nails and artificial joints. These implants require long-term contact

Grade 2 Titanium Metal Sheet

Grade 2 Titanium Sheet is a titanium sheet that meets the NACE MR0175 (now NACE MR0103) standard for corrosion and stress corrosion cracking resistance for materials used in hydrogen sulfide (H₂S)

ASME SB-265 Pure Grade 2 Titanium Plate

ASME SB-265 gr2 titanium sheet has a very small thermal conductivity, only 1/5 of that of iron and 1/8 of that of aluminum, so it can effectively insulate the temperature transfer, and is suitable

ASTM F67 Grade 2 Titanium Sheet

ASTM F67 Grade 2 Titanium Sheet is a pure titanium sheet that conforms to the ASTM F67 standard, which specifies the chemical composition and physical property requirements for medical grade pure

Titanium Strip Coil Grade 2

Titanium is a new metal. Due to its excellent properties, it is widely used in aviation, aerospace, chemical industry, petroleum, metallurgy, light industry, electricity, seawater desalination, ships

Titanium Strip Coil Grade 1

Grade 1 titanium is the first of four industrially pure titanium grades. It is the softest and most ductile of these grades. It has maximum formability, excellent corrosion resistance and high impact

Titanium Strip Roll Grade 23

Titanium Ti64 Grade 23 is a titanium alloy with lower oxygen and iron contents than the standard Ti64 alloy. The material is known for having excellent mechanical properties: low density, high

Titanium Strip Roll Grade 12

Gr12 titanium alloy is a titanium alloy material, which is composed of pure titanium with 0.3-0.8% molybdenum and 0.6-1.2% nickel added.

Titanium Strip Roll Grade 9

‌Grade 9 titanium alloy‌, also known as Ti-3Al-2.5V, is a titanium alloy close to the α-β type. Its main components include 3% aluminum and 2.5% vanadium, in addition to small amounts of iron,

Titanium Strip Roll Grade 7

Titanium Grade 7 (UNS R52400) has similar physical and mechanical properties to Grade 2. It has excellent welding and fabrication properties and is extremely resistant to corrosion, especially to

Titanium Strip Roll Grade 6

Grade 6 Titanium, which is also known as Ti-5Al-2.5Sn, has high service temperature of 480°C (896°F), medium strength, and excellent weldability and fabricability. Ti-5Al-2.5Sn alloy has good