China tantalum alloy for institutional applications Manufacturers Factory Suppliers

ASTM B365 Tantalum Alloy Rod

ASTM B365 / F560 Tantalum R05200 round bar is known for its resistance to acid consumption. It is not attacked by aqua regia at temperatures below 150 degrees Celsius. It is very flexible and can be

Tantalum Wire Mesh

Tantalum wire mesh applications. 1. Filtration: Tantalum wire mesh is used in filtration applications due to its chemical resistance and ability to withstand high temperatures. It is commonly used as

Tantalum Ribbon

Tantalum wire and tape is corrosion resistant and has good thermal conductivity. Some of its uses are in the manufacture of heating elements, vacuum tubes and other high-temperature components.

Capacitor Grade Tantalum Wire

Capacitor Grade Tantalum (Ta) Wire Specifications:. Diameter: Pure Tantalum. Purity: 99.95%. Diameter: 0.2-0.8mm. Standard: ASTM B 365

Tantalum Flange

Tantalum is also commonly used in the nuclear industry, e.g. for components of nuclear reactors, as it is more resistant to radiation.

Tantalum Crucible

Material: Tantalum (99.95%) . Melting point: 3017°C　. Suggested filling ratio: 67~75 . Recommended to use under inert gas. Use in air or oxygen-enriched environments will cause oxidation of the

Tantalum Bar Rod

With its high melting point, hardness and low coefficient of thermal expansion, Tantalum excels in demanding applications such as electronics, aerospace and medical devices.

Tantalum Tube Pipe

Material: Pure Tantalum. UNS No.: R05200, R05400. Size: OD: 1.0~150mm, weight: 0.1~5mm, length: 10mm~6000mm. Purity: ≥99.95%, 99.995. Standard: ASTM B521. Condition: hard, semi-hard, mild

Tantalum Sheet Plate

Material: Pure Tantalum. UNS No.: R05200, R05400. Size: Thickness: 0.1～20mm, Width: 20～1000mm, Length: 20mm～2000mm. Purity: ≥99.95%, 99.995. Standard: ASTM B708. Condition: hard, semi-hard, mild

Tantalum Wire

The pure metal is used in the electronics industry to make various types of electronic devices (e.g. rectifiers, capacitors, filaments, etc.). Tantalum is also used in vacuum systems because of its

Tantalum Metal

Tantalum is chemically very much like niobium, since the two have similar electronic configurations and, due to lanthanide contraction, the radius of the tantalum ion is almost the same as that of

Tantalum Sheet

Tantalum is commonly used in high-temperature vacuum furnaces. In many cases, it is used not only as a shield or support structure, but often as the heating element itself. Depending on the size and