Titanium

AMS 4911 Ti6Al4V Titanium Plate

Titanium Grade 5 (Ti6Al-4V) is the most commonly used alloy. Ti6Al4V is significantly stronger than other commercially pure titanium whilst still retaining the same stiffness and thermal properties

BS 3 Ti-6Al-4V Titanium Sheet

BS 3 Ti-6Al-4V Titanium Sheet is a titanium alloy sheet produced to British Standard (BS).Ti-6Al-4V is a widely used titanium alloy with excellent mechanical properties and corrosion resistance.

ASTM F620 Ti-6Al-4V ELI Titanium Alloy Rod

Standard Name: ASTM F620 - 17. Scope of Application: This standard covers Ti-6Al-4V ELI (ultra low clearance) alloy bars, wires, and forgings for surgical implants.. Material type: Ti-6Al-4V ELI

ASTM 543 10mm Ti-6Al-4V Titanium Rod

Standard Name: ASTM B543 - 22. Scope of application: This standard covers titanium and titanium alloy rods, wires, and forgings in the annealed state or solution-treated and aging-treated.. Material

UNS R56400 5mm Titanium Rod

Chemical composition and mechanical properties of UNS R56400 titanium bar:. Contains 6% aluminum, 4% vanadium.. Tensile strength ≥ 931MPa, yield strength ≥ 862MPa, elongation ≥ 10%.

MIL-T-9047 Ti-6Al-4V Titanium Alloy Bar

MIL-T-9047 Ti-6Al-4V titanium rods have excellent corrosion resistance, especially in seawater, and are able to resist the erosion and corrosion of seawater. In addition, titanium has good resistance

MIL-T-9046 3mm Grade 5 Titanium Rod

Chemical composition: the main component is titanium, the rest is aluminum, vanadium and other alloying elements, the specific content should refer to the material certificate.Physical properties:

ASTM F136 Ti-6Al-4V 2mm Titanium Rod

AMS 4967 is a standard for titanium alloys that specifies the technical requirements for titanium and titanium alloy rods, wires, forgings, and rings.4 mm Grade 5 indicates that the titanium rod has

AMS 4967 4mm Grade 5 Titanium Rod

Alloy Name: AMS 4967. Specification: 4mm diameter. Grade: Grade 5 (usually refers to the performance level achieved after specific heat treatment)

AMS 4934 GR5 Titanium Rectangular Bar

AMS 4920 is an important standard for titanium alloys, ensuring that the quality and performance of the alloy meets the high demands of industries such as aerospace.

AMS 4920 Ti-6Al-4V Titanium Square Bar

AMS 4920 is a specification of Ti-6Al-4V titanium alloy, which belongs to α+β type titanium alloy and is widely used in many fields due to its excellent comprehensive performance.

ASTM 543 Grade 5 Titanium Round Rod

When testing grade 5 titanium round bar, attention should be paid to its chemical composition, size, appearance quality and other aspects. Chemical analysis, metallographic inspection, mechanical