
Titanium Aircraft Case
Titanium aircraft casings — also called engine cases or casings — are the large structural shells of an aero engine: fan cases, intermediate cases, compressor cases and turbine-case components. They carry the rotating module loads, contain the gas path, and must combine high specific strength, fatigue resistance and light weight. This page defines the casing machining services offered. (Note: an engine "case" is a different component from the aircraft fuselage skin; this product covers engine casings.)
Description
1. Why Titanium for Engine Casings
Titanium alloy casings are roughly 45% lighter than steel equivalents (density 4.51 vs 7.85 g/cm³) while offering higher specific strength, so the engine structure is lighter without losing load capacity - directly reducing aircraft weight, fuel consumption and operating emissions. Titanium also resists the water, chloride and oxidation exposure found in service, extending casing life and reliability. Operating temperature is the selection limit: titanium grades are used up to about 400 °C, beyond which nickel-based alloys take over.

2. Materials
- TC4 / Ti-6Al-4V (Gr5, UNS R56400) per AMS 4928 / GB/T 2965 - fan and intermediate case standard.
- TC11 and TA15 - higher-temperature compressor-section casings.
- Material supplied with full chemical and mechanical certification; forgings or rolled rings as the starting form.
3. Casing Types Machined
- Fan case and containment rings.
- Intermediate and compressor cases (first-stage, second-stage, multi-stage).
- Turbine-case components and accessory gearbox housings on request.
4. Machining Capability and Tolerances
| Capability | Value |
| Machining center | 3-axis and 5-axis CNC |
| Wall thickness capability | 1.5–3 mm thin-wall sections with distortion control |
| Case diameter | 300–1600 mm |
| Machined tolerance | IT7–IT9 on critical bores and flanges |
| Surface finish | Ra 0.8–3.2 μm as specified |
Thin-wall titanium machining is demanding: the work-hardening tendency and vibration sensitivity require rigid fixturing, sharp tooling, high-pressure coolant and controlled stock removal sequences to hold form and avoid distortion.
5. Quality and Certification
Aero casings are verified per the purchaser's specification: ultrasonic examination of the raw material, liquid penetrant inspection of machined surfaces, dimensional reports from CMM verification, and chemical and mechanical test results with full heat-number traceability. Certificates follow EN 10204/3.1 or the equivalent; special process approval (NDT, heat treatment) is maintained per applicable aviation requirements.

6. Applications
Titanium casings serve civil and military turbofan and turboshaft engines, auxiliary power units and industrial gas turbines - wherever casing weight and reliability at moderate temperatures are critical.
7.About us
GNEE takes technological innovation as its core competitiveness, with a provincial-level technology research and development center and more than 30 patented technologies. We continue to optimize the copper processing process and develop special copper alloy materials with high conductivity and high strength to meet the needs of new energy, 5G communication and other emerging industries, and to promote the copper processing industry to high-end and refined development.

Hot Tags: titanium aircraft case, China titanium aircraft case manufacturers, suppliers, factory, titanium, Titanium, Industry Wire Titanium







