ASTM B338 Titanium Alloy Tubes
This specification covers 28 grades of seamless and welded titanium alloy tubes for surface condensers, evaporators, and heat exchangers.
Description
What Is ASTM B338?
ASTM B338 is the primary international specification covering seamless and welded titanium and titanium alloy tubes used in surface condensers, evaporators, and heat exchangers.
The current active version is ASTM B338-17(2021) , which includes 28 distinct titanium and titanium alloy grades. This standard is technically equivalent to ASME SB-338, meaning tubes certified to ASTM B338 also meet ASME Boiler and Pressure Vessel Code requirements, enabling dual certification for broader industrial applications.
| Grade | UNS Designation | Material Description |
|---|---|---|
| Grade 1 | R50250 | Unalloyed titanium |
| Grade 2 | R50400 | Unalloyed titanium |
| Grade 2H | R50400 | Unalloyed titanium (58 ksi min UTS) |
| Grade 3 | R50550 | Unalloyed titanium |
| Grade 7 | R52400 | Unalloyed Ti + 0.12-0.25% Pd |
| Grade 7H | R52400 | Unalloyed Ti + Pd (58 ksi min UTS) |
| Grade 9 | R56320 | Ti-3Al-2.5V alloy |
| Grade 11 | R52250 | Unalloyed Ti + 0.12-0.25% Pd |
| Grade 12 | R53400 | Ti-0.3Mo-0.8Ni alloy |
| Grade 13 | R53413 | Ti-0.5Ni-0.05Ru alloy |
| Grade 14 | R53414 | Ti-0.5Ni-0.05Ru alloy |
| Grade 15 | R53415 | Ti-0.5Ni-0.05Ru alloy |
| Grade 16 | R52402 | Unalloyed Ti + 0.04-0.08% Pd |
| Grade 16H | R52402 | Unalloyed Ti + Pd (58 ksi min UTS) |
| Grade 17 | R52252 | Unalloyed Ti + 0.04-0.08% Pd |
| Grade 18 | R56322 | Ti-3Al-2.5V + 0.04-0.08% Pd |
| Grade 26 | R52404 | Unalloyed Ti + 0.08-0.14% Ru |
| Grade 26H | R52404 | Unalloyed Ti + Ru (58 ksi min UTS) |
| Grade 27 | R52254 | Unalloyed Ti + 0.08-0.14% Ru |
| Grade 28 | R56323 | Ti-3Al-2.5V + 0.08-0.14% Ru |
| Grade 30 | R53530 | Ti-0.3Co-0.05Pd alloy |
| Grade 31 | R53532 | Ti-0.3Co-0.05Pd alloy |
| Grade 33 | R53442 | Ti-0.4Ni-0.015Pd-0.025Ru-0.15Cr |
| Grade 34 | R53445 | Ti-0.4Ni-0.015Pd-0.025Ru-0.15Cr |
| Grade 35 | R56340 | Ti-4.5Al-2Mo-1.6V-0.5Fe-0.3Si |
| Grade 36 | R58450 | Ti-45Nb alloy |
| Grade 37 | R52815 | Ti-1.5Al alloy |
| Grade 38 | R54250 | Ti-4Al-2.5V-1.5Fe alloy |
| Grade 39 | R53390 | Ti-0.25Fe-0.4Si alloy |




Seamless vs. Welded: Which One Should You Specify?
| Parameter | Seamless Titanium Tube | ASTM B338 Welded Titanium Tube |
|---|---|---|
| Manufacturing Process | Rotary piercing + cold rolling | Strip rolling + continuous welding |
| Wall Thickness Tolerance | ±10% typical | ±5% typical (more consistent) |
| Length Limitation | Limited by billet weight | Unlimited (coil or cut lengths) |
| Cost Index (Grade 2) | 1.00 (Baseline) | 0.75–0.85 (15–25% lower) |
| Availability (OD < 50.8 mm) | 6–8 weeks | 3–4 weeks |
Welded tubes are now standard for seawater-cooled heat exchangers in the 12.7 mm–38.1 mm OD range, provided the weld bead is removed (cold drawn) and 100% eddy current tested per ASTM E426 or E309.
Mandatory Testing and Certification Requirements
| Test | Frequency | Acceptance Criteria |
|---|---|---|
| Tensile Test | 1 per lot | Per grade table (UTS, YS, Elongation) |
| Flattening Test | 2 tubes per lot | No cracks |
| Flare Test | 2 tubes per lot | No cracks (seamless only) |
| Flange Test | 2 tubes per lot | No cracks (welded only) |
| Non-Destructive Test | 100% | Eddy current or ultrasonic per ASTM E426/E213 |
| Hydrostatic Test | 100% | Alternative to NDT if agreed |
ASTM B338 vs. ASME SB-338: What's the Difference?
Technically: None.
ASME SB-338 is identical in chemical, mechanical, and testing requirements to ASTM B338. The only difference is the jurisdictional reference.
ASTM B338 is cited in general industrial specifications (oil & gas, desalination, power).
ASME SB-338 is cited in ASME Section VIII, Division 1 pressure vessel codes.
Our factory
Our factory specializes in the precision manufacturing of ASTM B338 titanium alloy tubes, integrating over 18 years of experience in both seamless and welded titanium tubing for global heat exchanger, desalination, and offshore applications. Equipped with advanced cold rolling mills, automated plasma welding lines, and 100% in-house NDT capabilities-including eddy current and ultrasonic testing-we ensure full traceability from raw titanium strip or billet to finished tube. All production is dual-certified to ASTM B338 and ASME SB-338, with mill test reports provided for every lot. From Grade 2 commercial purity to high-performance Grade 7, 9, and 12 alloys, we deliver consistent quality, competitive lead times, and technical support for OEMs and engineering contractors worldwide.

Our team
Our team is composed of highly experienced metallurgists, welding engineers, and production specialists with decades of combined expertise in titanium tube manufacturing and quality assurance. From raw material inspection to final non-destructive testing, every member is committed to precision, traceability, and continuous improvement. We work closely with customers during the specification phase to recommend the most cost-effective grade and manufacturing method, and our technical sales engineers provide real-time support for RFQs, third-party inspections, and project documentation. Whether it's a standard Grade 2 condenser tube order or a custom alloy requirement with tight tolerances, our team delivers reliable solutions, on time and as certified.
Trustworthy Team

Customer visits

GNEE Participation in Exhibitions

Hot Tags: astm b338 titanium alloy tubes, China astm b338 titanium alloy tubes manufacturers, suppliers, factory, titanium, Titanium Welded Tube, Titanium Alloy Pipe, Grade 5 titanium round tube, Grade 2 Titanium Tubing, Titanium Gr5 Straight Tubing, Titanium 6Al 4V Round Pipe









