10mm Gr2 Titanium Rod For Hydro Carbon Processing
Gr.2 Most widely used in chemical pressure vessels and seawater treatment applications.
Description
From highly oxidizing to slightly chlorinated environments, Gr.2 titanium rods exhibit superior corrosion resistance. It is designed for continuous service at 800°F and intermittent service at 1000°F.
First-class Gr2 titanium rod production process
Mechanical Properties
The following table shows mechanical properties of grade 2 Unalloyed Ti ("Pure") 50A alloy.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 485 MPa | 70300 psi |
| Yield strength | 345 MPa | 50000 psi |
| Poisson's ratio | 0.34-0.40 | 0.34-0.40 |
| Elastic modulus | 105 - 120 GPa | 15200 - 17400 ksi |
| Elongation at break | 28% | 28% |
| Hardness (HV) | 160-200 | 160-200 |
Gr.2 Titanium Round Bar Application Areas
1. Reactors: Used in the manufacture of reactor components in hydrocarbon processing such as stirring shafts, agitators, liners, etc.
2. heat exchangers: used to manufacture heat exchanger components in hydrocarbon processing, such as heat exchanger tubes, shells, etc., to improve heat transfer efficiency and reduce energy consumption.
3. pumps and compressors: used in the manufacture of pump and compressor components in hydrocarbon processing, such as impellers, casings, etc., to ensure the efficient operation of these equipment in corrosive media.
4. Filters and separators: used to manufacture filters and separator components in hydrocarbon processing, such as cartridges, separator plates, etc.
Inspection equipment for Gr2 titanium rods
Highly Reliable Factory Supply Gr2 Titanium Round Bar
GNEE is a manufacturer specialising in the research, development, production, sales and service of titanium products such as titanium tubes, titanium rods, titanium sheets, titanium wires and titanium strips. Our company is located in Henan Province with convenient traffic. Our factory has been engaged in foreign markets for more than 16 years and has rich production experience. Our main markets are Dubai, Indonesia, Singapore, Vietnam, Malaysia, Philippines, Chile, Mexico, Israel, Spain and so on.
Hot Tags: 10mm gr2 titanium rod for hydro carbon processing, China 10mm gr2 titanium rod for hydro carbon processing manufacturers, suppliers, factory, titanium, Dia 10mm Titanium Rod In Medical, Gr6 Medical Grade Titanium Rod, Medical Grade Gr2 Titanium Rod, Gr5 Titanium Bar, Gr12 Titanium Round Rod, Gr6 Titanium Rec Bar
