Knowledge

What is the effect of the alloying elements of TC4 titanium alloy sheet on th...

What is the effect of the alloying elements of TC4 titanium alloy plate on the variable temperature? Titanium alloy is an alloy composed of titanium as the basis and other elements

Is there any relationship between hardness and strength of Ti6AL4V titanium a...

Is there any relationship between the hardness and strength of Ti6AL4V titanium alloy? The hardness of titanium alloy is not high, the hardness of pure titanium is HV280-300, the h

Gr2 ERTi-2 titanium wires with carburizing surface treatment

Analysis of the problem of how to carburize surface treatment of titanium wire? Pure titanium is a silver-white metal that has many excellent properties. Titanium wire forms a stab

Structural changes in 3al-2.5v titanium rods in hot extrusion

3al-2.5v titanium rods in hot extrusion processing what are the structural changes? The appearance of titanium rods is very similar to steel, the density of 4.51 g / cm 3, less tha

Technical requirements for the use of capillary titanium tubes

Capillary titanium tube is light in quality, high in strength and superior in mechanical properties. It is widely used in heat exchange equipment, such as tube heat exchanger, coil

Working conditions and composition of high temperature 3al-2.5v titanium alloy

An introductory note on the working conditions and composition of high temperature 3al-2.5v titanium alloy! High temperature titanium alloys are mainly used in the manufacture of a

Advantages of Gr2 Titanium Alloy

The density of Gr2 titanium alloy is generally around 4.5g/cm3, which is only 60% of steel. The strength of pure titanium is close to that of ordinary steel. The strength of some h

ZTC4 casting titanium alloy material introduction

ZTC4 alloy is a medium-strength α-β cast titanium alloy with good casting and welding properties as well as corrosion resistance, and is one of the most widely used cast

Influence of forging process on the organization and properties of Gr2 titani...

Gr2 titanium bar forging materials are mainly pure titanium and titanium alloys of various compositions, and the original state of the material has titanium rods, ingots, metal pow

Gr9 Titanium in the aerospace industry

The aviation industry is the earliest sector to develop and apply Gr9 titanium and titanium alloys. Without titanium in airplanes and engines, it would be practically impossible to

Grade 7 titanium alloy argon arc welding process points of attention

Grade 7 titanium alloy Argon arc welding titanium alloy pipe welding is usually on-site all-position welding, the difficulty of welding than stainless steel pipe much higher than t

What are the factors affecting Gr12 titanium alloy forgings?

Gr12 titanium alloy has small specific gravity, high melting point (about 1600 ℃), good plasticity, high specific strength, corrosion resistance, can work at high temperatures for