Titanium Round Tube alpha-beta alloy Grade 9
Oct 20, 2025
GNEE can provide the form
Products Description
Titanium Grade 9 tube is a near alpha, alpha-beta alloy. It offers much more strength than CP titanium, and unlike Ti-6-4 can be cold worked resulting in moderately high strength and good ductility. It is as weldable as the CP grades and has excellent resistance to corrosion.
Can provide various types of titanium tubes according to customer requirements, accept fixed length, chaotic length.
When transporting and depositing titanium and titanium alloy pipes, care should be taken not to contact or collide with ferrous materials.
Titanium and titanium alloy tubes should be cut by mechanical methods, and the cutting speed should be at a low speed; when cutting or grinding titanium tubes, special grinding wheels should be used; flame cutting should not be used.
When installing titanium and titanium alloy pipes, iron tools and materials shall not be used to knock and squeeze; titanium and titanium alloy pipes shall be installed with bushings when passing through walls and floor slabs. The insulation should not contain iron impurities.
Product Introduction
|
NAME |
ASTM B861 titanium grade 9 tube price |
|
GRADE |
GR9 |
|
STANDARD |
ASTM B861, ASTM B862 |
|
DIMENSION (MM) |
according to customers' requirements |
Chemical Requirements
|
Grade |
N |
C |
H |
Fe |
O |
Al |
V |
Ti |
|
Gr9 |
0.03 |
0.08 |
0.015 |
0.25 |
0.15 |
2.5~3.5 |
2.0~3.0 |
ball |
Mechanical Properties
|
Grade |
Tensile strength (δ5MPa) |
Residual elongation stress (δ0.2MPa) |
Elongation δ (%) |
|
Gr9 |
620~860 |
275~725 |
15 |
Products provided by GNEE
|
Name |
Titanium & Titanium Alloy Tube /Pipe |
|
Material |
Gr1,Gr2,Gr3,Gr4,Gr5(Ti-6Al-4V),Gr7,Gr9,Gr11,Gr12,Gr23(Ti-6Al-4V Eli) |
|
Standard |
ASTM B337 ASTM B338 ASTM B861 ASTM B862 |
|
Type |
Seamless,Welded |
|
OD |
3-114mm or as customized |
|
Wall Thickness |
0.2-50mm or as customized |
|
Length |
Max 6m |
|
End |
Plain End, Beveled End, Threaded |
|
Certificate |
EN 10204/3.1B,Raw Materials Certificate,100% Radiography Test Report,Third Party Inspection Report, etc |
|
Application |
Off-Shore Oil Drilling Companies Power Generation Petrochemicals Gas Processing Specialty Chemicals Pharmaceuticals Pharmaceutical Equipment Chemical Equipment Sea Water Equipment Heat Exchangers Condensers Pulp and Paper Industry |
|
Standard |
ASTM F67 ASTM F136 etc. |
|
Grade |
Gr1 Gr2 Gr3 Gr4 Gr5 Gr7 Gr9 Gr12 Gr23 |
|
Process method |
Hot Rolled,Forged |
|
Specification |
Diameter:5-300mm(as required) |
|
Dlivery time |
7-25 days |
|
Package |
Wooden case |
|
Surface |
acid surface or polishing, sand blasted surface |
|
Shape |
Round, flat, square, hexagonal |
|
Used |
Widely use for aerospace, industry and medical |
|
Application |
1. Chemical industry
2. Petrochemical industry 3. Machining field,Automobile field,etc 4. Desalination of sea water 5. Textile printing and dyeing |
|
Production Name |
Titanium plate/Titanium sheet |
|||
|
Grade |
Gr1, Gr2, Gr3,Gr4,Gr5, Gr7, Gr6,Gr9, Gr11, Gr12 ,Gr16, Gr17,Gr25 |
|||
|
Size |
All sizes can be customized |
|||
|
Application |
Metallurgy, electronics, machinery, medical treatment, chemical industry, petroleum, medical treatment, aerospace |
|||
|
Feature |
High corrosion resistance, low density, good thermal stability |
|||
|
Technology |
Hot Forged, Hot Rolled, Cold Rolled, Annealing, Pickling |
|||
|
Surface |
Bright, Polished, Pickling, Acid cleaning, Sandblasting |
|||
|
Packing |
Export Standard Woodcase |
|||
|
Delivery time |
10-25days according to the quantity and process of the product |
|||
|
Quality and test |
Hardness test, Bending test, Hydrostatic etc. |
|||
|
Material
|
Pure titanium and Titanium alloy
|
|
|
GR1/GR2/GR3/Gr4/GR5/GR7/GR9/GR12/Gr5Eli
|
|
Standard
|
ASTM B863/ASME SB863, ASTMF67, ASTM F136, ISO-5832-2(3) etc
|
|
Shape
|
Titanium Coil Wire/Titanium Spool Wire/Titanium Straight Wire
|
|
Wire Gauge
|
Dia(0.1--2) *L
|
|
Process
|
Bar billets-hot rolling-drawing-annealing-strength-pickling
|
|
Surface
|
Polishing, picking, acid washed, black oxide
|
|
Main Technique
|
Hot Forged; Hot Rolled; Cold drawn; Straighten etc
|
|
Material Milling Certificate
|
According to. EN 10204.3.1
Including Chemical composition and Mechanical property |
|
Application
|
Welding, Industry
|
|
Processing |
CNC lather,CNC tuming,CNc Milling, SLA, 3D printing |
||||
|
Finish |
Polish, Chrome plating, sand blasting, painting, powder coating,electrophoresis, or else. as your choice |
||||
|
Size & Design |
Per customized specifications in your drawings |
||||
|
Tolerance |
0.01 to 0.05mm |
||||
|
Drawing |
Solid Works,Pro/Engineer, AutoCAD(DXF,DWG), PDF,TI |
||||
|
Application |
Car,Bicycle, Scooter, Machinary |
||||
|
Electronics, Furniture, Construction |
|||||
|
Sport equipment,other industrial |
|||||
|
QC System |
1.Materail: Strickly control of material selection , meet clients request |
||||
|
2.In-prosess inspection:detect product after each process finished |
|||||
|
3.Final inspection :stricly quality test before items are packed |
|||||
|
Lead Time |
1-2 weeks for samples,3-4 weeks for mass production |
||||
