Titanium Gr 9 straight Pipes Tubes for Aerospace Industry
Oct 20, 2025
GNEE can provide the form
Products Description
GNEE is a well-known brand in the global market. Today, we are a leading manufacturer, supplier, and exporter of the highest-quality products for the industrial and engineering sectors, with a wide range of products and a huge demand. We specialize in the production and distribution of titanium alloy Gr 9 pipes in a wide variety of sizes, dimensions, and specifications to valued customers worldwide. To meet our customers' needs, we offer a wide range of sizes, dimensions, and specifications.
Titanium alloy Gr 9 pipes include straight seam submerged arc welded (LSAW) pipes, seamless pipes, preformed pipes, electric resistance welded (ERW) pipes, and welded pipes. Pipe shapes include rectangular, hydraulic, round, and square pipes. Lengths include single/double lengths and cut-to-length, and ends include plain, beveled, and threaded.
We design our UNS R56320 pipes using only high-quality alloys to enhance their strength. Gr 9 pipes are favored for their high mechanical strength, excellent seawater corrosion resistance, excellent strength-to-weight ratio, good weldability and formability, and relatively low thermal expansion. It also offers resistance to stress corrosion cracking in sour gas and chloride-containing environments, as well as excellent resistance to crevice corrosion, pitting corrosion, and erosion corrosion.
Titanium Alloy Grade 9 Pipes and Tubes Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS |
|---|---|---|
| Titanium Gr 9 | 3.7195 | R56320 |
Titanium Alloys Gr 9 Pipes & Tubes Chemical Composition
| Al | Ti | V |
|---|---|---|
| max | max | max |
| 3 | 95 | 2.5 |
Grade 9 Titanium Pipes & Tubes of Mechanical Properties
| Hardness, Brinell | 256 | 256 | Estimated from Rockwell C |
|---|---|---|---|
| Hardness, Knoop | 278 | 278 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 24 | 24 | annealed |
| Hardness, Vickers | 280 | 280 | Estimated from Brinell. |
| Tensile Strength, Ultimate | 89900 MPa | 620 psi | |
| Tensile Strength, Yield | 500 MPa | 72500 psi | |
| Elongation at Break | 15 % | 15 % | |
| Modulus of Elasticity | 100 Gpa | 14500 ksi | |
| Compressive Yield Strength | 105 GPa | 100000 ksi | In Tension |
| Notched Tensile Strength | 790 MPa | 115000 psi ksi | |
| Poisson's Ratio | 0.3 | 0.3 | |
| Charpy Impact | 86 J | 63.4 ft-lb | V-notch |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Fatigue Strength | 280 MPa | 40600 psi | 50,000 cycles. Kt (stress concentration factor) = 1.8 |
Physical Properties of Grade 9 Titanium Alloy Pipes and Tubes
| Physical Properties | Metric | English |
|---|---|---|
| Density | 4.48 g/cc | 0.162 lb/in³ |
Titanium Alloy Gr 9 Pipes & Tubes Application Industries
Petrochemical Industry
Oil and Gas Industry
Chemical Industry
Power Plant Industry
Energy Industry
Pharmaceuticals Industry
Pulp & Paper Indusry
Food Processing Industry
Aerospace Industry
Refining Industry
Products provided by GNEE
|
Name |
Titanium & Titanium Alloy Tube /Pipe |
|
Material |
Gr1,Gr2,Gr3,Gr4,Gr5(Ti-6Al-4V),Gr7,Gr9,Gr11,Gr12,Gr23(Ti-6Al-4V Eli) |
|
Standard |
ASTM B337 ASTM B338 ASTM B861 ASTM B862 |
|
Type |
Seamless,Welded |
|
OD |
3-114mm or as customized |
|
Wall Thickness |
0.2-50mm or as customized |
|
Length |
Max 6m |
|
End |
Plain End, Beveled End, Threaded |
|
Certificate |
EN 10204/3.1B,Raw Materials Certificate,100% Radiography Test Report,Third Party Inspection Report, etc |
|
Application |
Off-Shore Oil Drilling Companies Power Generation Petrochemicals Gas Processing Specialty Chemicals Pharmaceuticals Pharmaceutical Equipment Chemical Equipment Sea Water Equipment Heat Exchangers Condensers Pulp and Paper Industry |
|
Standard |
ASTM F67 ASTM F136 etc. |
|
Grade |
Gr1 Gr2 Gr3 Gr4 Gr5 Gr7 Gr9 Gr12 Gr23 |
|
Process method |
Hot Rolled,Forged |
|
Specification |
Diameter:5-300mm(as required) |
|
Dlivery time |
7-25 days |
|
Package |
Wooden case |
|
Surface |
acid surface or polishing, sand blasted surface |
|
Shape |
Round, flat, square, hexagonal |
|
Used |
Widely use for aerospace, industry and medical |
|
Application |
1. Chemical industry
2. Petrochemical industry 3. Machining field,Automobile field,etc 4. Desalination of sea water 5. Textile printing and dyeing |
|
Production Name |
Titanium plate/Titanium sheet |
|||
|
Grade |
Gr1, Gr2, Gr3,Gr4,Gr5, Gr7, Gr6,Gr9, Gr11, Gr12 ,Gr16, Gr17,Gr25 |
|||
|
Size |
All sizes can be customized |
|||
|
Application |
Metallurgy, electronics, machinery, medical treatment, chemical industry, petroleum, medical treatment, aerospace |
|||
|
Feature |
High corrosion resistance, low density, good thermal stability |
|||
|
Technology |
Hot Forged, Hot Rolled, Cold Rolled, Annealing, Pickling |
|||
|
Surface |
Bright, Polished, Pickling, Acid cleaning, Sandblasting |
|||
|
Packing |
Export Standard Woodcase |
|||
|
Delivery time |
10-25days according to the quantity and process of the product |
|||
|
Quality and test |
Hardness test, Bending test, Hydrostatic etc. |
|||
|
Material
|
Pure titanium and Titanium alloy
|
|
|
GR1/GR2/GR3/Gr4/GR5/GR7/GR9/GR12/Gr5Eli
|
|
Standard
|
ASTM B863/ASME SB863, ASTMF67, ASTM F136, ISO-5832-2(3) etc
|
|
Shape
|
Titanium Coil Wire/Titanium Spool Wire/Titanium Straight Wire
|
|
Wire Gauge
|
Dia(0.1--2) *L
|
|
Process
|
Bar billets-hot rolling-drawing-annealing-strength-pickling
|
|
Surface
|
Polishing, picking, acid washed, black oxide
|
|
Main Technique
|
Hot Forged; Hot Rolled; Cold drawn; Straighten etc
|
|
Material Milling Certificate
|
According to. EN 10204.3.1
Including Chemical composition and Mechanical property |
|
Application
|
Welding, Industry
|
|
Processing |
CNC lather,CNC tuming,CNc Milling, SLA, 3D printing |
||||
|
Finish |
Polish, Chrome plating, sand blasting, painting, powder coating,electrophoresis, or else. as your choice |
||||
|
Size & Design |
Per customized specifications in your drawings |
||||
|
Tolerance |
0.01 to 0.05mm |
||||
|
Drawing |
Solid Works,Pro/Engineer, AutoCAD(DXF,DWG), PDF,TI |
||||
|
Application |
Car,Bicycle, Scooter, Machinary |
||||
|
Electronics, Furniture, Construction |
|||||
|
Sport equipment,other industrial |
|||||
|
QC System |
1.Materail: Strickly control of material selection , meet clients request |
||||
|
2.In-prosess inspection:detect product after each process finished |
|||||
|
3.Final inspection :stricly quality test before items are packed |
|||||
|
Lead Time |
1-2 weeks for samples,3-4 weeks for mass production |
||||
