Let's Take A Look At What Are The Methods Of Cleaning Titanium Rods?

1, alkaline washing: titanium rods with 3-5% hydroxide nano-analytical pure solution immersed in 30-60 minutes, the temperature of about 40 degrees. Good in the ultrasonic cleaning machine. After immersion with filtered deionized water or water for injection inside and outside the rinse to neutral, measure the conductivity. Blow dry with pure air ≥ 0.4Mpa pressure.

2, pickling: titanium rods with 5% nitric acid solution soaked for more than 8 hours at a temperature of 40 degrees. Good in the ultrasonic cleaning machine. After immersion with filtered deionized water or water for injection inside and outside the flush to neutral, measure the conductivity. Blow dry with pure air ≥ 0.4Mpa pressure.
3, the above two methods can be used alone, can also be used alternately with each other. If conditions, can be combined with ultrasonic cleaning machine with good results. 4, organic contamination can be combined with surfactant cleaning, debris contamination system combined with enzyme cleaning is effective.