Products

Pure Titanium Coil Strip Grade 1

Grade 1 titanium is the first of four industrially pure titanium grades. It is the softest and most ductile of these grades. It has maximum formability, excellent corrosion resistance and high impact

Titanium Strip Coil Grade 23

Titanium Ti64 Grade 23 is a titanium alloy with lower oxygen and iron contents than the standard Ti64 alloy. The material is known for having excellent mechanical properties: low density, high

Titanium Strip Coil Grade 12

Gr12 titanium alloy is a titanium alloy material, which is composed of pure titanium with 0.3-0.8% molybdenum and 0.6-1.2% nickel added.

Titanium Strip Coil Grade 9

‌Grade 9 titanium alloy‌, also known as Ti-3Al-2.5V, is a titanium alloy close to the α-β type. Its main components include 3% aluminum and 2.5% vanadium, in addition to small amounts of iron,

Titanium Strip Coil Grade 7

Titanium Grade 7 (UNS R52400) has similar physical and mechanical properties to Grade 2. It has excellent welding and fabrication properties and is extremely resistant to corrosion, especially to

Titanium Strip Coil Grade 6

Grade 6 Titanium, which is also known as Ti-5Al-2.5Sn, has high service temperature of 480°C (896°F), medium strength, and excellent weldability and fabricability. Ti-5Al-2.5Sn alloy has good

Titanium Strip Coil Grade 5

Titanium Grade 7 (UNS R52400) has similar physical and mechanical properties to Grade 2. It has excellent welding and fabrication properties and is extremely resistant to corrosion, especially to

Titanium Strip Coil Grade 4

The main alloying elements added to the fourth-grade titanium alloy are aluminum, chromium, molybdenum, etc., and its strength, toughness and corrosion resistance are significantly improved. It is

Titanium Strip Coil Grade 3

Grade 3 titanium alloy has more alloy elements added, including vanadium, chromium, nickel, etc., which greatly improves its strength and corrosion resistance. It can be used in high-strength

Pure Grade 1 Titanium Bar Aircraft Skin

Gr1 titanium rods have many advantages in the deep-drawing molding process, but they also face some challenges. These challenges can be effectively overcome by optimizing the mold design, adjusting

ASM 4940 Solid Grade 1 Titanium Rod

Grade 1 solid titanium rods have good wear resistance during machining, which can extend tool life and reduce machining cost.

ASTM B348 Gr1 Titanium Metal Bar

Gr1 grade titanium rods excel in a variety of corrosive environments and are particularly suited to marine environments, chemical plants and medical equipment.