China tantalum alloy for fluctuating flow applications Manufacturers Factory Suppliers

Tantalum Crucible

Material: Tantalum (99.95%) . Melting point: 3017°C　. Suggested filling ratio: 67~75 . Recommended to use under inert gas. Use in air or oxygen-enriched environments will cause oxidation of the

Potassium Tantalate Niobate Crystal

It has been known since the 1950s that potassium tantalum niobate crystals have a very large electro-optical effect; i.e., a large change in refractive index with a relatively low applied voltage. To

Potassium Tantalate Crystal Substrates

Potassium Tantalate, KTaO3 Substrate, KTaO3 Single Crystal is a novel crystal having a perovskite structure and pyrochlore, has broad market prospects in superconducting thin film applications. Since

Tantalum Single Crystal

Tantalum single crystal applications 1. Electronics and semiconductors: Tantalum single crystal is used in the production of electronic components such as capacitors, semiconductors and integrated

Lithium Tantalate Wafers

These lithium tantalate crystals are greater than 99.99% pure. At GNEE, you can find high-quality lithium tantalate bulk crystals, wafers and substrates.

Tantalum Disc

Our tantalum disc is carefully handled to prevent damage during storage and transportation and to preserve the quality of our product in its original condition.

Tantalum Bar Rod

With its high melting point, hardness and low coefficient of thermal expansion, Tantalum excels in demanding applications such as electronics, aerospace and medical devices.

Tantalum Metal

Tantalum is chemically very much like niobium, since the two have similar electronic configurations and, due to lanthanide contraction, the radius of the tantalum ion is almost the same as that of

Tantalum Plate

Semiconductors and Electronics. Defense. Furnace Accessories. Chemical Processing Equipment. Medical

Tantalum Bar

With its high melting point, hardness and low coefficient of thermal expansion, Tantalum excels in demanding applications such as electronics, aerospace and medical devices. Backed by our commitment

Tantalum Rod

In the chemical industry, when tantalum is used instead of stainless steel in equipment for the manufacture of various inorganic acids, the life of the equipment can be increased by tens of times

ASTM B365 Tantalum Alloy Rod

ASTM B365 / F560 Tantalum R05200 round bar is known for its resistance to acid consumption. It is not attacked by aqua regia at temperatures below 150 degrees Celsius. It is very flexible and can be