China tantalum alloy for fluctuating pressure applications Manufacturers Factory Suppliers

Tantalum Flange

Tantalum is also commonly used in the nuclear industry, e.g. for components of nuclear reactors, as it is more resistant to radiation.

Potassium Tantalate Niobate Crystal

It has been known since the 1950s that potassium tantalum niobate crystals have a very large electro-optical effect; i.e., a large change in refractive index with a relatively low applied voltage. To

Tantalum Single Crystal

Tantalum single crystal applications 1. Electronics and semiconductors: Tantalum single crystal is used in the production of electronic components such as capacitors, semiconductors and integrated

Tantalum Ribbon

Tantalum wire and tape is corrosion resistant and has good thermal conductivity. Some of its uses are in the manufacture of heating elements, vacuum tubes and other high-temperature components.

Tantalum Lump

GNEE specializes in the production of high-purity Tantalum briquettes with the highest possible density and the smallest possible average grain size for use in Chemical Vapor Deposition (CVD) and

Tantalum Crucible

Material: Tantalum (99.95%) . Melting point: 3017°C　. Suggested filling ratio: 67~75 . Recommended to use under inert gas. Use in air or oxygen-enriched environments will cause oxidation of the

Tantalum Disc

Our tantalum disc is carefully handled to prevent damage during storage and transportation and to preserve the quality of our product in its original condition.

Tantalum Foil Strip

To avoid collision or damage to Tantalum Foil during transportation, it is usually wrapped in pearl cotton (Expandable Polyethylene) and then packed in wooden crates. This ensures the integrity of

Tantalum Wire

The pure metal is used in the electronics industry to make various types of electronic devices (e.g. rectifiers, capacitors, filaments, etc.). Tantalum is also used in vacuum systems because of its

Tantalum Metal

Tantalum is chemically very much like niobium, since the two have similar electronic configurations and, due to lanthanide contraction, the radius of the tantalum ion is almost the same as that of

Tantalum Sheet

Tantalum is commonly used in high-temperature vacuum furnaces. In many cases, it is used not only as a shield or support structure, but often as the heating element itself. Depending on the size and

ASTM B708 Tantalum Alloy Plate

1.Grade: R05200, R05400, R05255, R05252, R05240. 2.Plate, Sheet, Strip Size:150-1000mm x 150-3000mm x 0.13 -10mm