China tantalum alloy for military applications Manufacturers Factory Suppliers

Tantalum Single Crystal

Tantalum single crystal applications 1. Electronics and semiconductors: Tantalum single crystal is used in the production of electronic components such as capacitors, semiconductors and integrated

Lithium Tantalate Wafers

These lithium tantalate crystals are greater than 99.99% pure. At GNEE, you can find high-quality lithium tantalate bulk crystals, wafers and substrates.

Tantalum Wire Mesh

Tantalum wire mesh applications. 1. Filtration: Tantalum wire mesh is used in filtration applications due to its chemical resistance and ability to withstand high temperatures. It is commonly used as

Tantalum Sputtering Target

Tantalum (Ta) is a refractory metal that is critical for microchip architectures in the high-growth semiconductor industry. High purity Tantalum targets are used to sputter microscopic thin layers of

Tantalum Ribbon

Tantalum wire and tape is corrosion resistant and has good thermal conductivity. Some of its uses are in the manufacture of heating elements, vacuum tubes and other high-temperature components.

Tantalum Sheet Plate

Material: Pure Tantalum. UNS No.: R05200, R05400. Size: Thickness: 0.1～20mm, Width: 20～1000mm, Length: 20mm～2000mm. Purity: ≥99.95%, 99.995. Standard: ASTM B708. Condition: hard, semi-hard, mild

Tantalum Foil Strip

To avoid collision or damage to Tantalum Foil during transportation, it is usually wrapped in pearl cotton (Expandable Polyethylene) and then packed in wooden crates. This ensures the integrity of

Tantalum Foil

Tantalum foil and tantalum tape can be used in the following applications:. - Used in laboratory equipment.. - Used as a substitute for platinum.. - Used in the manufacture of high-temperature alloys

Tantalum Rod

In the chemical industry, when tantalum is used instead of stainless steel in equipment for the manufacture of various inorganic acids, the life of the equipment can be increased by tens of times

Tantalum Alloys

Tantalum-tungsten alloys are refractory metals that maintain useful physical and chemical properties even at high temperatures. Tantalum-Tungsten alloys are characterized by a high melting point and

ASTM B365 Tantalum Alloy Rod

ASTM B365 / F560 Tantalum R05200 round bar is known for its resistance to acid consumption. It is not attacked by aqua regia at temperatures below 150 degrees Celsius. It is very flexible and can be

ASTM B708 Tantalum Alloy Plate

1.Grade: R05200, R05400, R05255, R05252, R05240. 2.Plate, Sheet, Strip Size:150-1000mm x 150-3000mm x 0.13 -10mm