China tantalum alloy for rectangular applications Manufacturers Factory Suppliers

Tantalum Single Crystal

Tantalum single crystal applications 1. Electronics and semiconductors: Tantalum single crystal is used in the production of electronic components such as capacitors, semiconductors and integrated

Niobium Ingot

Niobium Ingot (Nb Ingot) has a high melting point, excellent corrosion resistance, and good processability. It can be made into milled products used in pharmaceuticals, semiconductors, aerospace,

Potassium Tantalate Niobate Crystal

It has been known since the 1950s that potassium tantalum niobate crystals have a very large electro-optical effect; i.e., a large change in refractive index with a relatively low applied voltage. To

Tantalum Capillary

Tantalum capillaries play an important role in electronic equipment due to their high melting point, low vapor pressure and good electrical properties. It is used in the manufacture of electronic

Tantalum Ribbon

Tantalum wire and tape is corrosion resistant and has good thermal conductivity. Some of its uses are in the manufacture of heating elements, vacuum tubes and other high-temperature components.

Tantalum Lump

GNEE specializes in the production of high-purity Tantalum briquettes with the highest possible density and the smallest possible average grain size for use in Chemical Vapor Deposition (CVD) and

Tantalum Crucible

Material: Tantalum (99.95%) . Melting point: 3017°C　. Suggested filling ratio: 67~75 . Recommended to use under inert gas. Use in air or oxygen-enriched environments will cause oxidation of the

Tantalum Bar Rod

With its high melting point, hardness and low coefficient of thermal expansion, Tantalum excels in demanding applications such as electronics, aerospace and medical devices.

Tantalum Tube Pipe

Material: Pure Tantalum. UNS No.: R05200, R05400. Size: OD: 1.0~150mm, weight: 0.1~5mm, length: 10mm~6000mm. Purity: ≥99.95%, 99.995. Standard: ASTM B521. Condition: hard, semi-hard, mild

Tantalum Sheet Plate

Material: Pure Tantalum. UNS No.: R05200, R05400. Size: Thickness: 0.1～20mm, Width: 20～1000mm, Length: 20mm～2000mm. Purity: ≥99.95%, 99.995. Standard: ASTM B708. Condition: hard, semi-hard, mild

Tantalum Sheet

Tantalum is commonly used in high-temperature vacuum furnaces. In many cases, it is used not only as a shield or support structure, but often as the heating element itself. Depending on the size and

Tantalum Bar

With its high melting point, hardness and low coefficient of thermal expansion, Tantalum excels in demanding applications such as electronics, aerospace and medical devices. Backed by our commitment