China tungsten alloy competitors Manufacturers Factory Suppliers

Tungsten Molybdenum Alloy Plate

Tungsten-molybdenum alloy plate has good high-temperature strength and has properties similar to tungsten, but with a smaller specific gravity than tungsten.

Zirconium Metal Rod

Zirconium (Zr) rods are ideally suited for nuclear rods because of their small neutron absorption cross section and high melting point of 1855°C (3371°F). This silver-colored metallic element also

Tungsten Alloy Disc

Advantages of tungsten disks: unique heat resistance (melting point of tungsten is +3422°), high resistance to thermal deformation, high modulus of elasticity, smallest coefficient of thermal

Molybdenum Tungsten Mo-W Alloy

Molybdenum-tungsten alloys (Mo-W alloys) have excellent corrosion protection against molten zinc.

Tungsten-Copper W-Cu Electrodes

The value of copper-tungsten electrodes derives to a large extent from the unique mechanical and physical properties of the material: the high electrical conductivity of copper combined with the wear

Tungsten Wire Rope

Tungsten wire is widely used for producing electric light source parts and electric vacuum components, heating elements, and refractory parts in high-temperature furnaces. Tungsten wire is light, has

Cemented Tungsten Carbide Strip

Cemented Carbide Strip Blanks are used to create cutting tools and wear parts by shaping the cutting edges of tools such as saw blades, drills, and end mills. Carbide strip blanks made by mixing

Cemented Tungsten Carbide Rod

Cemented carbide rods, or tungsten carbide round rods, are also called tungsten steel rods, which simply means tungsten steel round rods or tungsten carbide round rods. Cemented carbide is a

Tungsten Nickel Copper W-Ni-Cu Alloy

Tungsten-nickel-copper alloy refers to an important class of tungsten-based heavy alloys, tungsten in the addition of nickel, copper alloys and on the basis of the addition of other metal elements in

Tungsten Plate

When heat treatment of tungsten plate is carried out, the following points need to be paid attention to: The quality of tungsten plate needs to be tested and controlled before heat treatment to

ASTM B777 Tungsten Base High Density Metal

B777 states that Grade 4 is not usable under non-magnetic conditions. Common magnetic tungsten alloys contain a binder of transition metals such as nickel and iron. Common non-magnetic tungsten

GB/T 26038 Tungsten Base High Density Sheet

Products Description GB/T 26038 Tungsten-based High Density Sheets Standard: GB/T 26038-2020 Grade: W90NiFe, W93NiFe, W95NiFe, W97NiFe Surface: smooth, bright Condition: Stress relieved, hot rolled.