China tantalum alloy grade Manufacturers Factory Suppliers

Tantalum Metal

Tantalum is chemically very much like niobium, since the two have similar electronic configurations and, due to lanthanide contraction, the radius of the tantalum ion is almost the same as that of

Niobium Ingot

Niobium Ingot (Nb Ingot) has a high melting point, excellent corrosion resistance, and good processability. It can be made into milled products used in pharmaceuticals, semiconductors, aerospace,

Potassium Tantalate Niobate Crystal

It has been known since the 1950s that potassium tantalum niobate crystals have a very large electro-optical effect; i.e., a large change in refractive index with a relatively low applied voltage. To

Lithium Tantalate Wafers

These lithium tantalate crystals are greater than 99.99% pure. At GNEE, you can find high-quality lithium tantalate bulk crystals, wafers and substrates.

Tantalum Wire Mesh

Tantalum wire mesh applications. 1. Filtration: Tantalum wire mesh is used in filtration applications due to its chemical resistance and ability to withstand high temperatures. It is commonly used as

Tantalum Sputtering Target

Tantalum (Ta) is a refractory metal that is critical for microchip architectures in the high-growth semiconductor industry. High purity Tantalum targets are used to sputter microscopic thin layers of

Tantalum Lump

GNEE specializes in the production of high-purity Tantalum briquettes with the highest possible density and the smallest possible average grain size for use in Chemical Vapor Deposition (CVD) and

Tantalum Wire Ta

Tantalum wire is a valuable and versatile material made from the rare and dense metal tantalum. It is widely used in electronics, medical, aerospace, and industrial applications. The wire has

Tantalum Sheet Plate

Material: Pure Tantalum. UNS No.: R05200, R05400. Size: Thickness: 0.1～20mm, Width: 20～1000mm, Length: 20mm～2000mm. Purity: ≥99.95%, 99.995. Standard: ASTM B708. Condition: hard, semi-hard, mild

Tantalum Rod

In the chemical industry, when tantalum is used instead of stainless steel in equipment for the manufacture of various inorganic acids, the life of the equipment can be increased by tens of times

Tantalum Alloys

Tantalum-tungsten alloys are refractory metals that maintain useful physical and chemical properties even at high temperatures. Tantalum-Tungsten alloys are characterized by a high melting point and

ASTM B365 Tantalum Alloy Rod

ASTM B365 / F560 Tantalum R05200 round bar is known for its resistance to acid consumption. It is not attacked by aqua regia at temperatures below 150 degrees Celsius. It is very flexible and can be