BS EN 2420 Ti-6Al-4V 1mm Titanium Sheet
BS EN 2420 is a European standard but is also widely used in the UK. The standard specifies technical conditions for products made of titanium and titanium alloys for aerospace applications.
Description
The mechanical properties of Ti-6Al-4V titanium sheet usually include the following indications:
Tensile strength: Minimum values are typically between 900 MPa and 1000 MPa.
Yield Strength (0.2% Offset): Typically between 800 MPa and 900 MPa minimum.
Elongation: Minimum of at least 10%.
BS EN 2420 Surface quality of alloyed titanium sheets
Surface Defects: Cracks, pores, inclusions and other defects are not allowed.
Surface finish: The surface should be smooth and free from obvious scratches or depressions.
Professional BS EN 2420 Ti-6Al-4V Titanium Sheet Supplier--GNEE
| Thickness | 0.1mm~100mm |
| Width | 10-3000mm,customizable |
| Length | Customizable |
| Surface | Pickled/Sandblasting/Polishing |
| Main Technique | Hot Rolled /Cold Rolled |
| Heat Treatment | Usually are Annealled,but Solid Solution & Aging can be also OK |
| Material Milling Certificate | According to. EN 10204.3.1 Including Chemical composition and Mechanical property |
| Application | Metallurgy, Electronics, Medical, Chemical, Petroleum, Pharmaceutical, aerospace, etc. |
BS EN 2420 Inspection and testing of rectangular titanium sheets
Chemical analysis: Confirm whether the chemical composition meets the standard by spectral analysis or other methods.
Mechanical property test: including tensile strength, yield strength, elongation and section shrinkage.
Non-destructive testing: such as ultrasonic testing and magnetic particle testing to ensure that there are no defects within the material.
Dimensional and appearance inspection: to ensure that the product meets the dimensional and surface quality requirements.
Packing of BS EN 2420 Ti-6Al-4V metal plate
Highly Reliable Factory Supply BS EN 2420 Ti-6Al-4V Thin Titanium Sheet
GNEE has 16 years of experience in titanium products and exports. The company is headquartered in Henan Province, China. The company is adjacent to the Beijing-Hong Kong-Macao Expressway and has more than 200 employees who are dedicated to the company. The company has a registered capital of 10 million RMB and covers an area of more than 350,000 square metres. The company has passed SGS certification.
We provide high quality products, good service and competitive price. We have been committed to producing titanium tubes, titanium sheets, titanium foils, titanium wires, titanium rods and so on.
Our products are exported to more than 150 countries and have entered key industries such as petroleum, chemical, medical, automotive, large power station, aerospace and so on.
Hot Tags: bs en 2420 ti-6al-4v 1mm titanium sheet, China bs en 2420 ti-6al-4v 1mm titanium sheet manufacturers, suppliers, factory, titanium, Gr5 titanium alloy plate, 6Al 4V Industrial Titanium plate, Gr5 3D Printing Titanium Plate, Titanium Pure Plates, Gr5 pure titanium sheet, Titanium Gr7 Sheet Metal
