Grade 2 Titanium Plate

Grade 2 Titanium Plate

Standard: ASTM B265
Thickness: 0.5–100 mm
Width: 1,000–2,000 mm
Length: 2,000–6,000 mm
Surface: Pickled, sandblasted, polished, machined
Process: Hot rolled, cold rolled Delivery Condition: Annealed

Description

What is a Grade 2 titanium plate?

ASME SB 265 Ti Gr2 Plate

Grade 2 Titanium Plate is a commercially pure titanium material designated as UNS R50400, offering a practical balance of corrosion resistance, mechanical strength, formability, and weldability. It is widely selected for industrial equipment exposed to seawater, chloride-containing solutions, and many chemical processing environments.

Compared with Grade 1 titanium, Grade 2 provides higher strength while retaining good formability and corrosion resistance. This makes it a common choice for fabricating chemical processing equipment, heat exchangers, pressure vessels, storage tanks, and marine components.

Item Details
Product Name Grade 2 Titanium Plate
Material Type Commercially Pure Titanium
Titanium Grade Grade 2
UNS Number R50400
Material Number 3.7035
Standard ASTM B265
Product Forms Plate / Sheet / Cut-to-Size Material
Supply Condition Annealed
Typical Density 4.51 g/cm³
Main Characteristics Corrosion Resistance, Formability, Weldability
Main Applications Chemical Processing, Heat Exchangers, Marine Equipment, Desalination

Request a Grade 2 Titanium Plate Quote

 

Grade 2 Titanium Plate Specifications

Grade 2 titanium plates are supplied in different thicknesses and dimensions depending on the manufacturing route, available stock, and production capacity.

When selecting a plate, purchasers should confirm more than its nominal thickness. Thickness tolerance, width, length, flatness, surface condition, and delivery state can all affect subsequent cutting, forming, welding, and installation.

 

Product Specification Table

Specification Details
Material Commercially Pure Titanium
Grade Grade 2
UNS R50400
Material Number 3.7035
Standard ASTM B265
Product Form Plate / Sheet
Manufacturing Route Hot Rolled / Cold Rolled
Supply Condition Annealed
Surface Finish Pickled / Ground / Polished
Thickness Confirmed against current production and stock range
Width Available mill and stock dimensions
Length Standard mill lengths or cut-to-size, subject to availability
Inspection Chemical, Mechanical, Dimensional and Surface Inspection
Certification EN 10204 3.1 MTC, when specified and available

 

Types of Grade 2 Titanium Plates

Hot Rolled Grade 2 Titanium Plate

Hot Rolled Grade 2 Titanium Plate

 

Chemical storage tanks

Pressure vessel components

Industrial equipment linings

Cold Rolled Grade 2 Titanium Sheet

Cold Rolled Grade 2 Titanium Sheet

 

Chemical equipment panels

Thin-walled fabricated parts

Corrosion-resistant enclosures

 

Cut-to-Size Grade 2 Titanium Plate

Cut-to-Size Grade 2 Titanium Plate

 

Heat exchanger components

Reactor and vessel parts

Custom-machined components

Pickled Grade 2 Titanium Plate

Pickled Grade 2 Titanium Plate

 

Seawater handling equipment

Chemical processing 

Corrosion-resistant fabricated parts

Chemical Composition of Grade 2 Titanium

The chemical composition of Grade 2 titanium is controlled to maintain its commercially pure titanium characteristics and required mechanical properties.

Oxygen and iron are particularly important because their content influences the strength and ductility of commercially pure titanium.

The following table presents the commonly specified maximum chemical limits for Grade 2 titanium under ASTM B265.

 

Grade 2 Titanium Chemical Composition (wt.%)

Element Maximum Content
Nitrogen (N) 0.03%
Carbon (C) 0.08%
Hydrogen (H) 0.015%
Iron (Fe) 0.30%
Oxygen (O) 0.25%
Other Elements, Each 0.10%
Other Elements, Total 0.40%
Titanium (Ti) Balance

 

Mechanical and Physical Properties of Grade 2 Titanium Plate

Grade 2 titanium offers moderate mechanical strength combined with good ductility and corrosion resistance. These properties make it suitable for fabricated industrial equipment where material formability and corrosion performance are important.

 

Mechanical Properties

The following are commonly referenced ASTM B265 minimum mechanical requirements for annealed Grade 2 plate at applicable thicknesses.

Property Requirement
Tensile Strength 345 MPa (50 ksi) min.
Yield Strength (0.2% Offset) 275 MPa (40 ksi) min.
Elongation 20% min.

Important: Applicable mechanical property limits and specimen requirements depend on the ordered product thickness and governing edition of ASTM B265. Confirm the acceptance criteria against the actual purchase specification and MTC.

 

Physical Properties

Property Typical Value
Density 4.51 g/cm³
Elastic Modulus Approximately 105 GPa
Thermal Conductivity Approximately 16.4 W/(m·K)
Linear Thermal Expansion Approximately 8.6 × 10⁻⁶ /°C
Specific Heat Capacity Approximately 0.523 J/(g·°C)

Physical property values are representative room-temperature reference values and are not substitutes for design calculations or certified material test results.

 

What These Properties Mean for Buyers

1. Moderate Strength

Grade 2 provides sufficient strength for many corrosion-resistant industrial components. For applications requiring substantially higher structural strength, Grade 5 may be worth comparing.

2. Good Ductility

Its elongation characteristics make it suitable for bending, forming, and fabrication when appropriate tooling and procedures are used.

3. Low Density

With a density of approximately 4.51 g/cm³, titanium weighs considerably less than carbon steel for the same volume.

4. Low Thermal Conductivity Compared with Copper

Grade 2 titanium has lower thermal conductivity than copper and many other heat exchanger materials. However, its corrosion resistance can make it attractive in specific heat exchanger environments where equipment service life is a priority.

 

Corrosion Resistance of Grade 2 Titanium

Corrosion resistance is one of the main reasons purchasers select Grade 2 titanium plates for chemical, marine, and industrial equipment.

Titanium forms a stable, protective oxide film on its surface. This passive film provides excellent resistance in many oxidizing environments, seawater, and chloride-containing solutions.

 

Corrosion Performance in Different Environments

Environment General Performance Application Consideration
Seawater Excellent Suitable for many seawater-handling components
Chloride Solutions Excellent in many conditions Evaluate temperature, concentration, and flow velocity
Wet Chlorine Good to excellent under suitable conditions Confirm moisture and operating conditions
Oxidizing Acids Generally good Check concentration and temperature
Alkaline Solutions Generally good Confirm chemical composition and operating conditions
Strong Reducing Acids Limited suitability Requires careful material evaluation
Fluoride-Containing Solutions Generally unsuitable without specific evaluation Fluoride can attack titanium's passive film

 

When Should You Choose Grade 2 Titanium?

Grade 2 is a practical material choice when the project requires:

Resistance to seawater and chloride-containing media.

Corrosion-resistant equipment with moderate mechanical strength.

Good formability for welded or fabricated components.

Long-term material performance in suitable chemical environments.

 

When Should You Consider Another Material?

Grade 2 is not suitable for every corrosive environment.

For example:

Strong reducing acid environments: Require careful corrosion assessment.

Fluoride-containing media: Titanium can suffer rapid corrosion.

High-strength structural applications: Grade 5 may be more appropriate.

More demanding corrosion environments: Grade 7 may be worth evaluating.

 

For chemical equipment projects, always provide the chemical medium, concentration, temperature, pressure, and operating conditions before finalizing the titanium grade.

 

Grade 2 Titanium Plate vs Other Titanium Grades

Choosing the correct titanium grade is important because different grades offer different combinations of strength, corrosion resistance, and fabrication performance.

Grade 2 is widely used for general industrial applications, but it is not always the most economical or technically suitable choice.

 

Grade 1 vs Grade 2 Titanium Plate

Comparison Grade 1 Grade 2
Material Type Commercially Pure Titanium Commercially Pure Titanium
UNS R50250 R50400
Strength Lower Higher
Ductility Excellent Good
Formability Excellent Good
Corrosion Resistance Excellent Excellent in many similar environments
Typical Applications Deep forming, chemical equipment Chemical equipment, marine equipment, industrial plates

Selection Advice: Choose Grade 1 when maximum formability is important. Choose Grade 2 when you need a stronger commercially pure titanium plate while retaining good corrosion resistance and fabrication characteristics.

 

Grade 2 vs Grade 5 Titanium Plate

Comparison Grade 2 Grade 5
Material Type Commercially Pure Titanium Ti-6Al-4V Alloy
UNS R50400 R56400
Strength Moderate High
Formability Good More limited
Weldability Good Requires controlled procedures
Typical Applications Chemical and marine equipment Aerospace and high-strength structures

Selection Advice: Grade 2 is generally preferred for corrosion-resistant industrial equipment, while Grade 5 is more appropriate when high strength-to-weight performance is the main requirement.

 

Grade 2 vs Grade 7 Titanium Plate

Comparison Grade 2 Grade 7
Material Type Commercially Pure Titanium Titanium-Palladium Alloy
UNS R50400 R52400
Main Characteristics General corrosion resistance Improved resistance in certain reducing acid environments
Alloy Addition No intentional palladium addition Palladium addition
Typical Applications Marine and chemical equipment More demanding chemical processing environments

Selection Advice: Grade 2 is a good general-purpose choice. Grade 7 should be considered when the specific chemical environment justifies the additional palladium-containing alloy.

Discuss Your Titanium Grade Selection

 

ASTM Standards and Technical Documents

Standard / Document Description
ASTM B265 Titanium and Titanium Alloy Strip, Sheet, and Plate
ASME SB-265 ASME-adopted specification for titanium and titanium alloy strip, sheet, and plate
Grade 2 Titanium Datasheet Material composition and mechanical properties
Titanium Plate Specification Chart Product dimensions and specification reference
Titanium Grade Comparison Chart Comparison of commercially pure titanium and titanium alloys

 

Applications of Grade 2 Titanium Plate

Grade 2 titanium plates are used in equipment where corrosion resistance, fabrication performance, and relatively low material weight are important.

The following are representative industrial applications. The actual material selection depends on the equipment design and operating environment.

Heat Exchanger Equipment

Heat Exchanger Equipment

Plate heat exchanger plates

Heat exchanger structural components

Condenser and cooler components

 

Why Grade 2?

Grade 2 offers good resistance to seawater and many chloride-containing cooling environments. It can be considered where corrosion performance is a key factor in equipment design.

For tubular heat exchangers, Grade 2 titanium tubes are commonly specified separately under ASTM B338.

Chemical Processing Equipment

Reactor linings

Chemical tank linings

Evaporator components

Corrosion-resistant vessel sections

 

Why Grade 2?

Its resistance to many oxidizing chemicals and chloride-containing solutions makes it suitable for a wide range of chemical processing applications.

Chemical Processing Equipment
Seawater Desalination Systems

Seawater Desalination Systems

Seawater equipment panels

Corrosion-resistant tank sections

Desalination equipment components

Reverse osmosis equipment parts

 

Why Grade 2?

Grade 2 provides good resistance to seawater and brines under suitable operating conditions.

Marine and Offshore Equipment

Seawater handling equipment

Marine equipment linings

Corrosion-resistant structural components

Offshore process equipment parts

 

Why Grade 2?

Its corrosion resistance and relatively low density make it a useful material for selected marine equipment applications.

Marine And Offshore Equipment

Send Your Titanium Plate Application Requirements

 

Manufacturing Process of Grade 2 Titanium Plate

1. Titanium Sponge and Raw Material Preparation

Titanium sponge and other qualified raw materials are prepared according to the required chemical composition.

2. Titanium Ingot Production

The raw materials are melted to produce titanium ingots. Vacuum arc remelting is a commonly used industrial process for titanium ingot production.

3. Slab Preparation

The ingot is processed into suitable intermediate material for subsequent rolling.

4. Hot Rolling

The titanium material undergoes hot rolling to reduce thickness and produce plate stock.

5. Heat Treatment

Annealing is used to obtain the specified material condition and support the required mechanical properties.

6. Pickling and Surface Treatment

Oxide scale is removed, and the surface is prepared for subsequent processing or delivery.

7. Cold Rolling (When Required)

Additional cold rolling can be used to achieve thinner gauges and more controlled dimensions.

8. Cutting and Leveling

The material is leveled and cut to the required dimensions, subject to the available processing capabilities.

9. Final Inspection

The finished titanium plates are checked for chemical composition, mechanical properties, dimensions, and surface quality.

Titanium and titanium alloysProduction process

 

Quality Inspection and Testing of Grade 2 Titanium Plate

Quality inspection is essential when purchasing Grade 2 titanium plates for industrial equipment, especially for pressure vessels, chemical processing systems, and marine applications.

Purchasers should confirm the inspection scope before ordering because not every test is automatically required for every plate.

 

Quality Inspection and Testing

Inspection Item Testing Content Purpose
Chemical Analysis N, C, H, Fe, O and other specified elements Verify material composition
Tensile Test Tensile strength and yield strength Verify mechanical properties
Elongation Test Elongation after fracture Evaluate ductility
Dimensional Inspection Thickness, width, and length Confirm dimensions
Thickness Tolerance Actual thickness measurement Verify dimensional compliance
Surface Inspection Scratches, cracks, pits, and visible defects Assess surface quality
Flatness Inspection Plate flatness Support fabrication and installation
Ultrasonic Testing Internal discontinuities, when specified Evaluate internal quality
Material Identification Grade and heat number Support material traceability
Chemical Analysis
Chemical Analysis
Dimensional Inspection
Dimensional Inspection
Surface Inspection
Surface Inspection
Thickness Tolerance
Thickness Tolerance
Ultrasonic Testing
Ultrasonic Testing

Request Grade 2 Titanium Plate Inspection Documents

 

Surface Finish and Heat Treatment

Surface condition and heat treatment are important considerations when selecting Grade 2 titanium plates.

They influence the material's appearance, dimensional condition, and suitability for subsequent fabrication.

 

Grade 2 Titanium Plate Surface Finishes

Surface Finish Description Typical Consideration
Pickled Chemically cleaned surface after oxide removal Common industrial surface condition
Ground Mechanically processed surface Suitable when a more uniform surface is required
Polished Smoother finished surface Used where surface appearance or finish requirements are important

The final surface condition should be specified in the purchase order. A polished surface should not be assumed to have a particular roughness value unless that value is agreed and inspected.

Pickled Titanium Plate
Pickled Titanium Plate
Ground Titanium Plate
Ground Titanium Plate
Polished Titanium Plate
Polished Titanium Plate

 

Heat Treatment of Grade 2 Titanium Plate

Grade 2 titanium is commonly supplied in the annealed condition under ASTM B265.

Annealing is used to restore ductility and relieve processing-related stresses.

Heat Treatment Purpose
Annealing Provides the specified annealed material condition and improves ductility
Stress Relief Annealing May be considered for certain fabricated components, subject to engineering requirements

Unlike precipitation-hardening alloys, Grade 2 titanium is not strengthened through a conventional solution-treatment and aging process like Grade 5 titanium.

For most general industrial purchases, the annealed delivery condition is the main requirement to confirm. Additional heat treatment should be discussed according to the component's fabrication and service requirements.

 

Packaging and Delivery of Grade 2 Titanium Plate

Proper packaging is important for protecting titanium plates during storage, handling, and international transportation.

Titanium plates should be protected against surface damage, contamination, and moisture-related packaging problems.

Titanium Plates Stacked Inside Wooden Crates
Titanium Plates Stacked Inside Wooden Crates
Protective Packaging for Titanium Plates Inside Wooden Crates
Protective Packaging for Titanium Plates Inside Wooden Crates
Titanium Plates Wrapped with Protective Paper
Titanium Plates Wrapped with Protective Paper
Titanium Plates Stored in Wooden Crates
Titanium Plates Stored in Wooden Crates
Titanium Plates Packed into Wooden Export Crates
Titanium Plates Packed into Wooden Export Crates

Packaging Methods

Packaging Method Purpose
Protective Film Helps prevent surface scratches
Interleaving Paper Separates individual plates and reduces contact damage
Plastic Wrapping Provides additional protection against moisture and dirt
Wooden Pallets Supports handling and transportation
Export Wooden Cases Protects plates during long-distance shipping
Product Labels Identifies grade, dimensions, quantity, and heat number

 

Information Shown on Packaging Labels

Product Name: Grade 2 Titanium Plate

Material Grade: Grade 2

Standard: ASTM B265

Dimensions

Quantity

Heat Number

Package Number

Destination or Shipping Marks

 

FAQ

Q: 1. What Is Grade 2 Titanium Plate?

A: Grade 2 Titanium Plate is a commercially pure titanium plate designated as UNS R50400. It offers a balance of moderate strength, good formability, weldability, and corrosion resistance. It is commonly used in chemical processing, marine equipment, and industrial applications.

Q: 2. What Is the ASTM Standard for Grade 2 Titanium Plate?

A: The main product standard is ASTM B265, which covers titanium and titanium alloy strip, sheet, and plate. The purchase order should identify the grade, product form, applicable standard edition, dimensions, and delivery condition.

Q: 3. What Is the Difference Between Grade 1 and Grade 2 Titanium Plate?

A: Both are commercially pure titanium grades. Grade 1 has lower strength and better formability, while Grade 2 provides higher strength with good corrosion resistance and fabrication performance.

Q: 4. Is Grade 2 Titanium Plate Suitable for Seawater Applications?

A: Yes. Grade 2 titanium offers excellent resistance to seawater and many chloride-containing environments. It is used in selected marine, desalination, and seawater-handling equipment. Actual suitability depends on operating conditions and component design.

Q: 5. Can Grade 2 Titanium Plate Be Welded?

A: Yes. Grade 2 titanium has good weldability when appropriate procedures are followed. TIG/GTAW welding is commonly used. Proper argon shielding is essential to protect the molten weld metal and hot heat-affected zone from oxygen, nitrogen, and hydrogen contamination.

Q: 6. What Is the Difference Between Grade 2 Titanium Plate and Titanium Sheet?

A: Both are covered by ASTM B265, but they represent different product forms and thickness categories. In general, sheet refers to thinner flat products, while plate refers to thicker products. Confirm the product definition and dimensions in the applicable standard and purchase specification.

Q: 7. Is Grade 2 Titanium Magnetic?

A: Grade 2 titanium is non-ferromagnetic. It does not exhibit the strong magnetic attraction associated with common ferromagnetic steels.

Q: 8. What Surface Finishes Are Available for Grade 2 Titanium Plate?

A: Common surface conditions include pickled, ground, and polished finishes. Availability and surface requirements should be confirmed according to the ordered dimensions and processing specifications.

Q: 9. What Documents Can Be Supplied with Grade 2 Titanium Plate?

A: Depending on the purchase specification and agreed inspection scope, documents may include an EN 10204 3.1 Mill Test Certificate, chemical analysis report, mechanical test report, dimensional inspection report, and specified NDT reports.

Q: 10. What Information Is Needed to Get a Grade 2 Titanium Plate Quote?

A: To prepare an accurate quotation, please provide:
Titanium Grade: Grade 2 / UNS R50400
Standard: ASTM B265
Thickness
Width
Length
Quantity
Required Surface Finish
Delivery Condition
Inspection and Certification Requirements
Destination Port or Delivery Location
If the material is intended for a specific industrial project, drawings or technical specifications are also helpful.

Request a Quote for Grade 2 Titanium Plate

 

Looking for a reliable supply of Grade 2 Titanium Plate for your industrial project?

Send us your required material grade, dimensions, quantity, and applicable standards. Our team can review your requirements and confirm the available material options, technical documentation, and quotation details.

 

Send your drawings, specifications, or RFQ to discuss your Grade 2 titanium plate requirements.

Hot Tags: grade 2 titanium plate, China grade 2 titanium plate manufacturers, suppliers, factory, titanium, 2mm Titanium Sheet, durable titanium plate, High Quality Grade 1 Titanium Plate for Medical, high quality titanium plate, Hot forming Titanium Sheet, thin titanium Gr5 sheet

(0/10)

clearall