ASTM F136 Gr23 Titanium polished Bar for Medical and dental implants
Oct 23, 2025 ASTM-F136.pdf
GNEE can provide the form
Products Description
Application:Medical
Diameter:5.0-350mm
Length:MAX:6000mm
Technique:Rolled
Grade:Gr23 Ti6al4v eli titanium rod dental implants
Standard:ASTM F136 ISO 5832-3
Advantage:Corrosion Resistance
Certificates:ISO 9001:2015
Certificates:SGS
tol：h6-H9
Surface1:polished
Medical Gr23 Titanium Bar is the higher purity version of Ti 6Al-4V. It is the top choice for any sort of situation where a combination of high strength, light weight, good corrosion resistance and high toughness are required. It has a superior damage tolerance to other alloys.
|
Al |
V |
Fe |
O |
C |
N |
H |
Y |
Others,Each |
Others,Total |
Ti |
|
|
MIN |
5.5 |
3.5 |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
|
MAX |
6.5 |
4.5 |
0.25 |
0.13 |
0.08 |
0.03 |
0.0125 |
0.005 |
0.1 |
0.4 |
Balance |
Tolerance of diameter
|
Diameter(mm) |
h7 |
h8 |
h9 |
h10 |
h11 |
h12 |
|
Tolerance precision (um) |
||||||
|
3Max |
10 |
14 |
25 |
40 |
60 |
100 |
|
3~6 |
12 |
18 |
30 |
48 |
75 |
120 |
|
6~10 |
15 |
22 |
36 |
58 |
90 |
150 |
|
10~18 |
18 |
27 |
43 |
70 |
110 |
180 |
|
18~30 |
21 |
33 |
52 |
84 |
130 |
210 |
|
30~50 |
25 |
39 |
62 |
100 |
160 |
250 |
|
50~80m |
30 |
46 |
74 |
120 |
190 |
300 |
Medical Gr23 Titanium Bar Main applications
Medical and dental implants
1. The chemical composition of medical gr23 titanium bar should meet the requirements of GB/T 3620.1, and the allowable deviation of the chemical composition should meet the requirements of GB/T 3620.2 when the buyer is re-inspected.
2. The diameter or side length of the hot processed bar and its allowable deviation should meet the requirements of Table 1.
3. After hot processing, after turning (polishing) the bar and cold rolling, the allowable deviation of the diameter of the cold drawn bar shall meet the requirements.
4. The out-of-roundness of the turned (polished) bar after hot working should not be more than half of its dimensional tolerance.
5. The indefinite length of the processed medical gr23 titanium bar is 300-6000mm, and the indefinite length of the annealed bar is 300-2000mm, and the fixed or multiple length should be within the range of indefinite length. The allowable deviation of the fixed length is + 20mm; the length of the double ruler shall also be included in the cutting amount of the bar, and the fixed length or the length of the ruler shall be indicated in the contract.
Products provided by GNEE
| Product Form | Standard Grades | Standard Specifications (ASTM/ASME) | Common Dimensions | Common States |
|---|---|---|---|---|
| Titanium Pipe & Tube | ||||
| Seamless Pipe | Gr. 1, Gr. 2, Gr. 3, Gr. 7, Gr. 9, Gr. 12, Gr. 16, Gr. 17 | ASTM B861, ASME SB861 | OD: 6 mm - 114 mm (1/4" - 4") Wall Thickness: 0.5 mm - 8.0 mm Length: up to 15 m |
Annealed |
| Welded Tube | Gr. 1, Gr. 2, Gr. 9, Gr. 12 | ASTM B862, ASME SB862 | OD: 3 mm - 100 mm Wall Thickness: 0.3 mm - 3.0 mm Length: up to 15 m |
Annealed, Welded & Cold-Drawn |
| Titanium Bar & Rod | ||||
| Bar (Round, Hex, Square) | Gr. 1, Gr. 2, Gr. 3, Gr. 4, Gr. 5 (Ti-6Al-4V), Gr. 7, Gr. 9, Gr. 12, Gr. 16, Gr. 17, Gr. 23 (Ti-6Al-4V ELI) | ASTM B348, ASME SB348 | Diameter / Width: 5 mm - 300 mm Length: 3 m, 4 m, or cut to length |
Hot Rolled, Cold Drawn, Annealed, Forged |
| Wire & Rod | Gr. 1, Gr. 2, Gr. 4, Gr. 5 | ASTM B348, ASTM F67, ASTM F136 | Diameter: 0.5 mm - 10 mm (Wire) Diameter: 10 mm - 25 mm (Rod) Coil Weight: Custom |
Annealed, Cold Worked |
| Titanium Plate & Sheet | ||||
| Plate | Gr. 1, Gr. 2, Gr. 3, Gr. 4, Gr. 5 (Ti-6Al-4V), Gr. 7, Gr. 9, Gr. 12, Gr. 16, Gr. 17, Gr. 23 (Ti-6Al-4V ELI) | ASTM B265, ASME SB265 | Thickness: 4.76 mm (3/16") - 100 mm Width: 600 mm - 2000 mm Length: up to 6000 mm |
Hot Rolled, Annealed, Mill Annealed |
| Sheet | Gr. 1, Gr. 2, Gr. 3, Gr. 4, Gr. 5, Gr. 7, Gr. 9, Gr. 12 | ASTM B265, ASME SB265 | Thickness: 0.1 mm - 4.75 mm Width: 600 mm - 1500 mm Length: up to 3000 mm |
Cold Rolled, Annealed |
| Titanium Foil | ||||
| Foil / Strip | Gr. 1, Gr. 2 | ASTM B265 | Thickness: 0.025 mm - 0.1 mm Width: 50 mm - 500 mm Coil / Cut Length |
Cold Rolled, Annealed |
