GR23 Titanium medical Wire (Ti-6AL-4V ELI)
Oct 23, 2025
GNEE can provide the form
Products Description
1). High tensile strength;
2). High corrosion resistance;
3). Low density, good thermal stability;
4). Non-ferromagnetic;
5). Good biocompatibility;
6). High temperature and low temperature resistance;
7). High resistance to strong acid and srong alkali and so on
GR23 Titanium Wire is the higher purity version of Ti 6Al-4V. It can be made into coils, strands, wires or flat wires and is the top choice for any sort of situation where a combination of high strength, light weight, good corrosion resistance and high toughness are required. It has a superior damage tolerance to other alloys.
These benefits make Ti 6AL-4V ELI the ultimate dental and medical titanium grade and can be used in biomedical applications such as implantable components due to its biocompatibility, good fatigue strength and low modulus.
Products provided by GNEE
| Product Form | Standard Grades | Standard Specifications (ASTM/ASME) | Common Dimensions | Common States |
|---|---|---|---|---|
| Titanium Pipe & Tube | ||||
| Seamless Pipe | Gr. 1, Gr. 2, Gr. 3, Gr. 7, Gr. 9, Gr. 12, Gr. 16, Gr. 17 | ASTM B861, ASME SB861 | OD: 6 mm - 114 mm (1/4" - 4") Wall Thickness: 0.5 mm - 8.0 mm Length: up to 15 m |
Annealed |
| Welded Tube | Gr. 1, Gr. 2, Gr. 9, Gr. 12 | ASTM B862, ASME SB862 | OD: 3 mm - 100 mm Wall Thickness: 0.3 mm - 3.0 mm Length: up to 15 m |
Annealed, Welded & Cold-Drawn |
| Titanium Bar & Rod | ||||
| Bar (Round, Hex, Square) | Gr. 1, Gr. 2, Gr. 3, Gr. 4, Gr. 5 (Ti-6Al-4V), Gr. 7, Gr. 9, Gr. 12, Gr. 16, Gr. 17, Gr. 23 (Ti-6Al-4V ELI) | ASTM B348, ASME SB348 | Diameter / Width: 5 mm - 300 mm Length: 3 m, 4 m, or cut to length |
Hot Rolled, Cold Drawn, Annealed, Forged |
| Wire & Rod | Gr. 1, Gr. 2, Gr. 4, Gr. 5 | ASTM B348, ASTM F67, ASTM F136 | Diameter: 0.5 mm - 10 mm (Wire) Diameter: 10 mm - 25 mm (Rod) Coil Weight: Custom |
Annealed, Cold Worked |
| Titanium Plate & Sheet | ||||
| Plate | Gr. 1, Gr. 2, Gr. 3, Gr. 4, Gr. 5 (Ti-6Al-4V), Gr. 7, Gr. 9, Gr. 12, Gr. 16, Gr. 17, Gr. 23 (Ti-6Al-4V ELI) | ASTM B265, ASME SB265 | Thickness: 4.76 mm (3/16") - 100 mm Width: 600 mm - 2000 mm Length: up to 6000 mm |
Hot Rolled, Annealed, Mill Annealed |
| Sheet | Gr. 1, Gr. 2, Gr. 3, Gr. 4, Gr. 5, Gr. 7, Gr. 9, Gr. 12 | ASTM B265, ASME SB265 | Thickness: 0.1 mm - 4.75 mm Width: 600 mm - 1500 mm Length: up to 3000 mm |
Cold Rolled, Annealed |
| Titanium Foil | ||||
| Foil / Strip | Gr. 1, Gr. 2 | ASTM B265 | Thickness: 0.025 mm - 0.1 mm Width: 50 mm - 500 mm Coil / Cut Length |
Cold Rolled, Annealed |
