Titanium Grade 23 Eli Bar for Medical industry
Oct 23, 2025
GNEE can provide the form
Products Description
Titanium Grade 23 Eli Bar is an alloyed Grade of Titanium. It is strengthened by the inclusion of roughly 6% Aluminum and 4% Vanadium. It is known to be of higher purity than its cousin, 6AL-4V Grade 5, because it has lower inclusions of Iron, Carbon, and Oxygen (ELI = Extra Low Interstitial). Titanium Grade 23 Eli Bar typically comes in the annealed condition, but can be found in beta annealed condition as well. Titanium Grade 23 Eli Bar shows high strength and toughness, as well as good corrosion resistance. As a biocompatible Grade of Titanium, it is well known for its applications in medical and dental industries. It is also found in aerospace applications.
The development of many different alloys has extended the application of titanium in industries ranging from industrial and chemical processing to power generation. This grade possesses good weldability, strength, ductility and formability.
Applications
Architecture
Power generation
Medical industry
Hydro-carbon processing
Marine industry
Exhaust pipe shrouds
Airframe skin
Desalination
Chemical processing
Chlorate manufacturing
Advantages
Greater corrosion resistance
Higher tensile strength
Brilliant polish
Excellent machine strength
High creep resistance
High temperature strenght
Excellent mechanical properties
Specification
| UNS: | R56401 |
|---|---|
| Standard | ASME SB-348, AMS 4930, AMS 4931, AMS 4956 |
Chemical Composition
|
C |
.08 max |
|
N |
.05 max |
|
O |
.13 max |
|
H |
.0125 max |
|
V |
3.50- 4.50 |
|
Al |
5.50- 6.50 |
|
Fe |
.25 max |
Titanium Corrosion Resistance
Titanium's outstanding corrosion resistance is due to the formation of a tightly adherent oxide film on its surface. When damaged, this thin invisible layer immediately reforms, maintaining a surface which is completely resistant to corrosive attack in sea water and all natural environments. This oxide is so resistant to corrosion that titanium components often look brand new even after years of service.
Products provided by GNEE
| Product Form | Standard Grades | Standard Specifications (ASTM/ASME) | Common Dimensions | Common States |
|---|---|---|---|---|
| Titanium Pipe & Tube | ||||
| Seamless Pipe | Gr. 1, Gr. 2, Gr. 3, Gr. 7, Gr. 9, Gr. 12, Gr. 16, Gr. 17 | ASTM B861, ASME SB861 | OD: 6 mm - 114 mm (1/4" - 4") Wall Thickness: 0.5 mm - 8.0 mm Length: up to 15 m |
Annealed |
| Welded Tube | Gr. 1, Gr. 2, Gr. 9, Gr. 12 | ASTM B862, ASME SB862 | OD: 3 mm - 100 mm Wall Thickness: 0.3 mm - 3.0 mm Length: up to 15 m |
Annealed, Welded & Cold-Drawn |
| Titanium Bar & Rod | ||||
| Bar (Round, Hex, Square) | Gr. 1, Gr. 2, Gr. 3, Gr. 4, Gr. 5 (Ti-6Al-4V), Gr. 7, Gr. 9, Gr. 12, Gr. 16, Gr. 17, Gr. 23 (Ti-6Al-4V ELI) | ASTM B348, ASME SB348 | Diameter / Width: 5 mm - 300 mm Length: 3 m, 4 m, or cut to length |
Hot Rolled, Cold Drawn, Annealed, Forged |
| Wire & Rod | Gr. 1, Gr. 2, Gr. 4, Gr. 5 | ASTM B348, ASTM F67, ASTM F136 | Diameter: 0.5 mm - 10 mm (Wire) Diameter: 10 mm - 25 mm (Rod) Coil Weight: Custom |
Annealed, Cold Worked |
| Titanium Plate & Sheet | ||||
| Plate | Gr. 1, Gr. 2, Gr. 3, Gr. 4, Gr. 5 (Ti-6Al-4V), Gr. 7, Gr. 9, Gr. 12, Gr. 16, Gr. 17, Gr. 23 (Ti-6Al-4V ELI) | ASTM B265, ASME SB265 | Thickness: 4.76 mm (3/16") - 100 mm Width: 600 mm - 2000 mm Length: up to 6000 mm |
Hot Rolled, Annealed, Mill Annealed |
| Sheet | Gr. 1, Gr. 2, Gr. 3, Gr. 4, Gr. 5, Gr. 7, Gr. 9, Gr. 12 | ASTM B265, ASME SB265 | Thickness: 0.1 mm - 4.75 mm Width: 600 mm - 1500 mm Length: up to 3000 mm |
Cold Rolled, Annealed |
| Titanium Foil | ||||
| Foil / Strip | Gr. 1, Gr. 2 | ASTM B265 | Thickness: 0.025 mm - 0.1 mm Width: 50 mm - 500 mm Coil / Cut Length |
Cold Rolled, Annealed |
