Titanium Gr23 TA6V ELi Alloy aerospace Plate
Oct 23, 2025
GNEE can provide the form
Products Description
Titanium Gr23 TA6V ELi Alloy Plate is very ductile.It is used for medical and dental applications. It is lightweight, resistant to corrosion and tough.It has a superior damage tolerance to other alloys.
|
Item |
Grade 23 Titanium plate |
|
Specification |
T 0.5-5.0mm x W1000mm x L2000-3500mm T 6.0-30mm x W1000mm-2500x L3000-6000mm T 30-80mm x W1000mm x L2000mm |
|
Standard |
ASTM B265, ASTM F136, ASTM F67,AMS4911 |
|
Technique |
Hot forging, hot rolled, cold rolled,annealing, pickling |
|
Condition |
R/Y/M |
|
Application |
Metallurgy, electronics, medical, petroleum, pharmaceutical,aerospace,etc |
Chemical Analysis
| Grade 23 |
N |
C |
H |
Fe |
O |
Al |
V |
Pa |
|
|
0.03 |
0.08 |
0.0125 |
0.25 |
0.13 |
5.5-6.5 |
Mechanical Properties
| Grade 23 |
Tensile strength(min) |
Yeild strength(min) |
Elongation(%) | ||
|
ksi |
MPa |
ksi |
MPa |
||
|
120 |
828 |
110 |
759 |
10 |
|
Titanium Gr23 TA6V ELi alloy plate are widely used in aerospace, medical and industrial applications including airframe and aircraft engine components, chemical processing machinery, heat exchangers, desalination plants and corrosive waste treatment equipment.
Products provided by GNEE
| Product Form | Standard Grades | Standard Specifications (ASTM/ASME) | Common Dimensions | Common States |
|---|---|---|---|---|
| Titanium Pipe & Tube | ||||
| Seamless Pipe | Gr. 1, Gr. 2, Gr. 3, Gr. 7, Gr. 9, Gr. 12, Gr. 16, Gr. 17 | ASTM B861, ASME SB861 | OD: 6 mm - 114 mm (1/4" - 4") Wall Thickness: 0.5 mm - 8.0 mm Length: up to 15 m |
Annealed |
| Welded Tube | Gr. 1, Gr. 2, Gr. 9, Gr. 12 | ASTM B862, ASME SB862 | OD: 3 mm - 100 mm Wall Thickness: 0.3 mm - 3.0 mm Length: up to 15 m |
Annealed, Welded & Cold-Drawn |
| Titanium Bar & Rod | ||||
| Bar (Round, Hex, Square) | Gr. 1, Gr. 2, Gr. 3, Gr. 4, Gr. 5 (Ti-6Al-4V), Gr. 7, Gr. 9, Gr. 12, Gr. 16, Gr. 17, Gr. 23 (Ti-6Al-4V ELI) | ASTM B348, ASME SB348 | Diameter / Width: 5 mm - 300 mm Length: 3 m, 4 m, or cut to length |
Hot Rolled, Cold Drawn, Annealed, Forged |
| Wire & Rod | Gr. 1, Gr. 2, Gr. 4, Gr. 5 | ASTM B348, ASTM F67, ASTM F136 | Diameter: 0.5 mm - 10 mm (Wire) Diameter: 10 mm - 25 mm (Rod) Coil Weight: Custom |
Annealed, Cold Worked |
| Titanium Plate & Sheet | ||||
| Plate | Gr. 1, Gr. 2, Gr. 3, Gr. 4, Gr. 5 (Ti-6Al-4V), Gr. 7, Gr. 9, Gr. 12, Gr. 16, Gr. 17, Gr. 23 (Ti-6Al-4V ELI) | ASTM B265, ASME SB265 | Thickness: 4.76 mm (3/16") - 100 mm Width: 600 mm - 2000 mm Length: up to 6000 mm |
Hot Rolled, Annealed, Mill Annealed |
| Sheet | Gr. 1, Gr. 2, Gr. 3, Gr. 4, Gr. 5, Gr. 7, Gr. 9, Gr. 12 | ASTM B265, ASME SB265 | Thickness: 0.1 mm - 4.75 mm Width: 600 mm - 1500 mm Length: up to 3000 mm |
Cold Rolled, Annealed |
| Titanium Foil | ||||
| Foil / Strip | Gr. 1, Gr. 2 | ASTM B265 | Thickness: 0.025 mm - 0.1 mm Width: 50 mm - 500 mm Coil / Cut Length |
Cold Rolled, Annealed |
