UNS R56401 Ti-Grade 23 ELI Ti 6Al-4V for Medical technology
Oct 22, 2025
GNEE can provide the form
Products Description
Ti-Grade 23 ELI is a variant of Ti-Grade 5 and is used in medical technology because of its good biocompatibility and excellent fracture toughness and crack propagation behavior. It maintains its good toughness even at low temperatures down to –253 °C. These properties, as well as its low elastic modulus and good fatigue strength are due to the alloy's relatively low contents of tramp elements such as oxygen and iron (Extra-Low Interstitials).
Standards
Chemical Composition
Mechanical Properties 20°C
Physical Properties 20°C
Products provided by GNEE
| Main Product | Common Grades (ASTM) | Standard Specifications | Common Surface Treatment |
|---|---|---|---|
| Titanium Tube (Seamless & Welded) |
Gr1, Gr2, Gr3, Gr7, Gr9, Gr12 | OD: 3mm - 150 mm Wall Thickness: 0.5mm - 10 mm Length: Up to 6000 mm (customizable) Standards: ASTM B337, ASTM B338 |
• Polished (Mirror / Satin) • Pickled • Annealed • Sandblasted |
| Titanium Sheet/Plate (Cold Rolled / Hot Rolled) |
Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Thickness: 0.1mm - 50 mm Width: 500mm - 1500 mm Length: 1000mm - 3000 mm Standards: ASTM B265 |
• Polished (No.4, BA, Mirror) • Pickled • Annealed • Sandblasted • Brushed |
| Titanium Wire | Gr1, Gr2, Gr5, Gr7 | Diameter: 0.1mm - 6.0 mm Form: Coil, Straight Length Standards: ASTM B863, F67, F136 |
• Annealed & Pickled • Bright (Clean) • Oxidized |
| Titanium Bar/Rod (Round, Hex, Square) |
Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Diameter (Round): 3mm - 200 mm Hex/Square Size: 4mm - 100 mm Length: 1000mm - 3000 mm (or cut-to-size) Standards: ASTM B348 |
• Turned / Peeled • Polished (Centerless Ground) • Annealed • Black Oxide |
| Titanium Foil | Gr1, Gr2,Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Thickness: 0.03mm - 0.1 mm Width: 50mm - 500 mm Standards: ASTM B265 |
• Bright Annealed (BA) • Cold Rolled |
| Titanium CNC Machining Parts | Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Capability: Custom components based on customer drawings. Processes: Milling, Turning, Drilling, Tapping, etc. |
• As-Machined • Deburred • Polished / Tumbled • Anodizing (Color, Black) • Sandblasted • Passivation |
