China automotive tungsten alloy Manufacturers Factory Suppliers

Tungsten Rhenium Alloy Plate

Tungsten rhenium alloy is a tungsten matrix, rhenium as an element of solid solution strengthening alloy. The rhenium content of the alloy is commonly used as 3%, 5%, 10%, 25%, 26%.

Zirconium Metal Rod

Zirconium (Zr) rods are ideally suited for nuclear rods because of their small neutron absorption cross section and high melting point of 1855°C (3371°F). This silver-colored metallic element also

Zirconium Crystal Bar

High purity crystalline zirconium rods are produced by iodination melting. Purity up to Zr+Hf≥99.98%, Hf≤0.025%/3%, low hafnium content (250ppm, i.e. 0.025%). Typically used for zirconium based

Tungsten Copper Plate

We stock sheets and plates containing 10%, 15%, 20%, 25%, 30%, 35%, 40% or 50% copper in thicknesses up to 50 mm, but we can supply tungsten-copper sheets and sizes in any size.

Tungsten Alloy Disc

Advantages of tungsten disks: unique heat resistance (melting point of tungsten is +3422°), high resistance to thermal deformation, high modulus of elasticity, smallest coefficient of thermal

Tungsten Alloy Rod

Tungsten has the highest melting point and the lowest coefficient of thermal expansion, making it suitable for environments that require extremely high temperatures.GNEE offers high quality tungsten

Molybdenum Tungsten Mo-W Alloy

Molybdenum-tungsten alloys (Mo-W alloys) have excellent corrosion protection against molten zinc.

Tungsten Nitride Targets

Tungsten layers are an integral part of the thin-film transistors in TFT-LCD screens. They are used when large screen formats, particularly high image sharpness and optimized contrast are required.

Tungsten Plate

When heat treatment of tungsten plate is carried out, the following points need to be paid attention to: The quality of tungsten plate needs to be tested and controlled before heat treatment to

GB/T 3875 Tungsten Alloy Sheet

Purity: 99.95% minimum. Standard: GB 3875-2017. Grade: W1. Surface: smooth, bright. Condition: stress relieved, hot rolled. Size: 0.1-6mm(L)*50-300mm(W)*50-1000mm(L)

ASTM B760 Tungsten Plate

Typical Size Capabilities for Flat Sheets and Plates. Thickness Range .002”(.05mm) – 2.0” (50mm). Width Max Range 2.0” (50mm) – 19.7” (500mm). Length Max Range 4” (100mm) – 59” (1500mm)

GB/T 26038 Tungsten Base High Density Sheet

Products Description GB/T 26038 Tungsten-based High Density Sheets Standard: GB/T 26038-2020 Grade: W90NiFe, W93NiFe, W95NiFe, W97NiFe Surface: smooth, bright Condition: Stress relieved, hot rolled.