China tantalum alloy for pulsed pressure flow applications Manufacturers Factory Suppliers

Tantalum Foil

Tantalum foil and tantalum tape can be used in the following applications:. - Used in laboratory equipment.. - Used as a substitute for platinum.. - Used in the manufacture of high-temperature alloys

Potassium Tantalate Niobate Crystal

It has been known since the 1950s that potassium tantalum niobate crystals have a very large electro-optical effect; i.e., a large change in refractive index with a relatively low applied voltage. To

Tantalum Single Crystal

Tantalum single crystal applications 1. Electronics and semiconductors: Tantalum single crystal is used in the production of electronic components such as capacitors, semiconductors and integrated

Tantalum Sputtering Target

Tantalum (Ta) is a refractory metal that is critical for microchip architectures in the high-growth semiconductor industry. High purity Tantalum targets are used to sputter microscopic thin layers of

Tantalum Flange

Tantalum is also commonly used in the nuclear industry, e.g. for components of nuclear reactors, as it is more resistant to radiation.

Tantalum Crucible

Material: Tantalum (99.95%) . Melting point: 3017°C　. Suggested filling ratio: 67~75 . Recommended to use under inert gas. Use in air or oxygen-enriched environments will cause oxidation of the

Tantalum Foil Strip

To avoid collision or damage to Tantalum Foil during transportation, it is usually wrapped in pearl cotton (Expandable Polyethylene) and then packed in wooden crates. This ensures the integrity of

Tantalum Wire

The pure metal is used in the electronics industry to make various types of electronic devices (e.g. rectifiers, capacitors, filaments, etc.). Tantalum is also used in vacuum systems because of its

Tantalum Metal

Tantalum is chemically very much like niobium, since the two have similar electronic configurations and, due to lanthanide contraction, the radius of the tantalum ion is almost the same as that of

Tantalum Sheet

Tantalum is commonly used in high-temperature vacuum furnaces. In many cases, it is used not only as a shield or support structure, but often as the heating element itself. Depending on the size and

Tantalum Bar

With its high melting point, hardness and low coefficient of thermal expansion, Tantalum excels in demanding applications such as electronics, aerospace and medical devices. Backed by our commitment

Tantalum Rod

In the chemical industry, when tantalum is used instead of stainless steel in equipment for the manufacture of various inorganic acids, the life of the equipment can be increased by tens of times