China tantalum alloy in construction Manufacturers Factory Suppliers

Tantalum Ingot Ta

GNEE sells high quality Tantalum Ingot (Ta Ingot). As a leading global supplier of Tantalum products, GNEE offers high quality Tantalum Ingot at competitive prices. We can also provide customized

Niobium Ingot

Niobium Ingot (Nb Ingot) has a high melting point, excellent corrosion resistance, and good processability. It can be made into milled products used in pharmaceuticals, semiconductors, aerospace,

Tantalum Single Crystal

Tantalum single crystal applications 1. Electronics and semiconductors: Tantalum single crystal is used in the production of electronic components such as capacitors, semiconductors and integrated

Lithium Tantalate Wafers

These lithium tantalate crystals are greater than 99.99% pure. At GNEE, you can find high-quality lithium tantalate bulk crystals, wafers and substrates.

Tantalum Sputtering Target

Tantalum (Ta) is a refractory metal that is critical for microchip architectures in the high-growth semiconductor industry. High purity Tantalum targets are used to sputter microscopic thin layers of

Tantalum Capillary

Tantalum capillaries play an important role in electronic equipment due to their high melting point, low vapor pressure and good electrical properties. It is used in the manufacture of electronic

Tantalum Crucible

Material: Tantalum (99.95%) . Melting point: 3017°C　. Suggested filling ratio: 67~75 . Recommended to use under inert gas. Use in air or oxygen-enriched environments will cause oxidation of the

Tantalum Foil

Tantalum foil and tantalum tape can be used in the following applications:. - Used in laboratory equipment.. - Used as a substitute for platinum.. - Used in the manufacture of high-temperature alloys

Tantalum Metal

Tantalum is chemically very much like niobium, since the two have similar electronic configurations and, due to lanthanide contraction, the radius of the tantalum ion is almost the same as that of

Tantalum Rod

In the chemical industry, when tantalum is used instead of stainless steel in equipment for the manufacture of various inorganic acids, the life of the equipment can be increased by tens of times

ASTM B365 Tantalum Alloy Rod

ASTM B365 / F560 Tantalum R05200 round bar is known for its resistance to acid consumption. It is not attacked by aqua regia at temperatures below 150 degrees Celsius. It is very flexible and can be

ASTM B708 Tantalum Alloy Plate

1.Grade: R05200, R05400, R05255, R05252, R05240. 2.Plate, Sheet, Strip Size:150-1000mm x 150-3000mm x 0.13 -10mm