China zirconium alloy phase controlled alloys Manufacturers Factory Suppliers

Zirconium Alloys for Orthopaedic and Dental

Zirconium alloys for biomedical applications are receiving increasing attention due to two unique properties: 1) the formation of an intrinsic bone-like apatite layer on their surfaces in the

Zirconium Sputtering Target

Zirconium is metallic materials that is hard, lustrous, silvery colored. It is extracted from its mineral ores (the oxide or zircon, ZrSiO4) by conversion to the tetrahalide followed by reduction

Zirconium Flange

Zirconium flanges are particularly useful in industry because of their resistance to hydrochloric acid, which corrodes at a rate of less than 5 mpy at all concentrations and temperatures above the

Zirconium Wire

Zirconium is a hard, lustrous, silver-colored metal extracted from ores (oxides or zirconia, ZrSiO4) by conversion to tetrahalides and then reduction with magnesium. Due to the formation of a stable

Zirconium Plate

Zirconium plate has a density between that of aluminum and grade 304 stainless steel plate. The density is 6.52 grams per cubic centimeter. The element zirconium has a melting point of 1855 degrees

Zirconium Metal

Zircon is relatively abundant in the Earth's crust, but is not deposited centrally and is characteristically observed in S-type stars. Zircon minerals are commonly found in alluvial deposits in

Zirconium Foil (Zr Foil)

Zirconium Foil Applications. - Used in the manufacture of high temperature superconducting materials.. - Used in the manufacture of electrode assemblies, foils, flange bolts, tubes and rods for

Zirconium Alloys with Low Melting Points

The capillary properties of zirconium alloys are so high that they can be used as casting alloys and as solder for brazing different materials. These alloys can also be produced in the form of

Zirconium-Niobium Alloys for Nuclear

Zirconium-niobium alloys are unique structural materials with high corrosion resistance at high temperatures (up to 350 °C) and under pressure, strong neutron and gamma radiation.

ASTM B352 Zirconium and Zirconium Alloy Plate

Grade: UNS R60001, UNS R60802, UNS R60804, UNS R60901. Plate/Strip/Sheet Size: Width 600 - 1500mm x Length 1000 - 6000mm x Thickness 0.3 - 100mm

ASTM B523 Zirconium and Zirconium Alloy Tubes

Seamless: 0.5-6*6-133*13000mm. Welded: 100-1200*5.0-12.0*13000mm. Extruded: 45-219*5.0-30.0*13000mm. Surface: Pickled surface, polished surface

ASTM B658 Zirconium and Zirconium Alloy Pipe

Zirconium is a hard, lustrous, silvery-colored metal that, when extracted from its ore (oxide or zircon, ZrSiO4), is first converted to a tetrahalide and then reduced with magnesium.