ASTM B265 Gr12 Titanium Electrodes polished Plate
Oct 21, 2025 ASTM-B265.pdf
GNEE can provide the form
Gr12 Titanium Bar
Composition
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Ni | 0.6 | 0.9 | |
| Mo | 0.2 | 0.4 | |
| Fe | 0.30 | ||
| O | 0.25 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
Density
| lb/in3 | g/cm3 |
|---|---|
| 0.163 | 4.51 |
Tensile Strength
| ksi | MPa |
|---|---|
| 70 min | 483 min |
Yield Strength
| ksi | MPa |
|---|---|
| 50 min | 345 min |
Gr12 Titanium Plate
Composition
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Ni | 0.6 | 0.9 | |
| Mo | 0.2 | 0.4 | |
| Fe | 0.30 | ||
| O | 0.25 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
Density
| lb/in3 | g/cm3 |
|---|---|
| 0.163 | 4.51 |
Tensile Strength
| ksi | MPa |
|---|---|
| 70 min | 483 min |
Yield Strength
| ksi | MPa |
|---|---|
| 50 min | 345 min |
Elongation
| 18% min |
Specifications
ASTM B265, ASME SB-265
Gr12 Titanium Sheet
Composition
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Ni | 0.6 | 0.9 | |
| Mo | 0.2 | 0.4 | |
| Fe | 0.30 | ||
| O | 0.25 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
Density
| lb/in3 | g/cm3 |
|---|---|
| 0.163 | 4.51 |
Tensile Strength
| ksi | MPa |
|---|---|
| 70 min | 483 min |
Yield Strength
| ksi | MPa |
|---|---|
| 50 min | 345 min |
Elongation
| 18% min |
Specifications
ASTM B265, ASME SB-265
Gr12 Titanium Strip
Composition
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Ni | 0.6 | 0.9 | |
| Mo | 0.2 | 0.4 | |
| Fe | 0.30 | ||
| O | 0.25 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
Density
| lb/in3 | g/cm3 |
|---|---|
| 0.163 | 4.51 |
Tensile Strength
| ksi | MPa |
|---|---|
| 70 min | 483 min |
Yield Strength
| ksi | MPa |
|---|---|
| 50 min | 345 min |
Elongation
| 18% min |
Specifications
ASTM B265, ASME SB-265
Products provided by GNEE
| Main Product | Common Grades (ASTM) | Standard Specifications | Common Surface Treatment |
|---|---|---|---|
| Titanium Tube (Seamless & Welded) |
Gr1, Gr2, Gr3, Gr7, Gr9, Gr12 | OD: 3mm - 150 mm Wall Thickness: 0.5mm - 10 mm Length: Up to 6000 mm (customizable) Standards: ASTM B337, ASTM B338 |
• Polished (Mirror / Satin) • Pickled • Annealed • Sandblasted |
| Titanium Sheet/Plate (Cold Rolled / Hot Rolled) |
Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Thickness: 0.1mm - 50 mm Width: 500mm - 1500 mm Length: 1000mm - 3000 mm Standards: ASTM B265 |
• Polished (No.4, BA, Mirror) • Pickled • Annealed • Sandblasted • Brushed |
| Titanium Wire | Gr1, Gr2, Gr5, Gr7 | Diameter: 0.1mm - 6.0 mm Form: Coil, Straight Length Standards: ASTM B863, F67, F136 |
• Annealed & Pickled • Bright (Clean) • Oxidized |
| Titanium Bar/Rod (Round, Hex, Square) |
Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Diameter (Round): 3mm - 200 mm Hex/Square Size: 4mm - 100 mm Length: 1000mm - 3000 mm (or cut-to-size) Standards: ASTM B348 |
• Turned / Peeled • Polished (Centerless Ground) • Annealed • Black Oxide |
| Titanium Foil | Gr1, Gr2,Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Thickness: 0.03mm - 0.1 mm Width: 50mm - 500 mm Standards: ASTM B265 |
• Bright Annealed (BA) • Cold Rolled |
| Titanium CNC Machining Parts | Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Capability: Custom components based on customer drawings. Processes: Milling, Turning, Drilling, Tapping, etc. |
• As-Machined • Deburred • Polished / Tumbled • Anodizing (Color, Black) • Sandblasted • Passivation |
