China tantalum alloy for triangular applications Manufacturers Factory Suppliers

Tantalum Flange

Tantalum is also commonly used in the nuclear industry, e.g. for components of nuclear reactors, as it is more resistant to radiation.

Potassium Tantalate Niobate Crystal

It has been known since the 1950s that potassium tantalum niobate crystals have a very large electro-optical effect; i.e., a large change in refractive index with a relatively low applied voltage. To

Tantalum Sputtering Target

Tantalum (Ta) is a refractory metal that is critical for microchip architectures in the high-growth semiconductor industry. High purity Tantalum targets are used to sputter microscopic thin layers of

Tantalum Ribbon

Tantalum wire and tape is corrosion resistant and has good thermal conductivity. Some of its uses are in the manufacture of heating elements, vacuum tubes and other high-temperature components.

Tantalum Lump

GNEE specializes in the production of high-purity Tantalum briquettes with the highest possible density and the smallest possible average grain size for use in Chemical Vapor Deposition (CVD) and

Tantalum Tube Pipe

Material: Pure Tantalum. UNS No.: R05200, R05400. Size: OD: 1.0~150mm, weight: 0.1~5mm, length: 10mm~6000mm. Purity: ≥99.95%, 99.995. Standard: ASTM B521. Condition: hard, semi-hard, mild

Tantalum Ingot Ta

GNEE sells high quality Tantalum Ingot (Ta Ingot). As a leading global supplier of Tantalum products, GNEE offers high quality Tantalum Ingot at competitive prices. We can also provide customized

Tantalum Metal

Tantalum is chemically very much like niobium, since the two have similar electronic configurations and, due to lanthanide contraction, the radius of the tantalum ion is almost the same as that of

Tantalum Sheet

Tantalum is commonly used in high-temperature vacuum furnaces. In many cases, it is used not only as a shield or support structure, but often as the heating element itself. Depending on the size and

Tantalum Rod

In the chemical industry, when tantalum is used instead of stainless steel in equipment for the manufacture of various inorganic acids, the life of the equipment can be increased by tens of times

ASTM B365 Tantalum Alloy Rod

ASTM B365 / F560 Tantalum R05200 round bar is known for its resistance to acid consumption. It is not attacked by aqua regia at temperatures below 150 degrees Celsius. It is very flexible and can be

ASTM B708 Tantalum Alloy Plate

1.Grade: R05200, R05400, R05255, R05252, R05240. 2.Plate, Sheet, Strip Size:150-1000mm x 150-3000mm x 0.13 -10mm