Titanium Grade 12 Sheets Plates Oil Gas Industry Coils
Oct 22, 2025
GNEE can provide the form
Products Description
GNEE is a recognized leader in the supply and manufacture of grade 12 titanium alloy sheet and coil, and an exporter of titanium alloy products. Grade 12 titanium alloy products are primarily used in aerospace engine components and turbine engines, and are also occasionally used in surgical implants.
Grade 12 titanium alloy products offer high strength, high-temperature resistance, high workability, and high ductility, along with excellent fabric and weldability. Grade 12 products also possess high strength, excellent corrosion resistance, and exhibit extreme performance.
Titanium Gr. 12 heets, Plates & Coils Specification
Specifications : ASTM B265 / ASME SB 265
Size : 8mm to 100mm
Type: Sheet, Plates, Coils, Flat, Strips, Profile, Blank ,Circle, Ring etc.
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form : Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Titanium Gr. 12 Sheets, Plates & Coils Chemical Composition
| Grade | C | N | O | H | Ti | Fe |
| Titanium Grade 12 | 0.08 max | .03 max | .25 max | .015 max | Bal | 0.30 max |
Ti Grade 12 Sheets, Plates & Coils Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Titanium Grade 12 | 4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 138000 , MPa – 950 | Psi – 128000 , MPa – 880 | 14 % |
Titanium Gr. 12 Sheets, Plates & Coils Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS |
| Titanium Gr. 12 | 3.7105 | R53400 |
Types of Titanium Gr. 12 Sheets, Plates & Coils
 |
Titanium Alloy Gr. 12 Sheets | Titanium DIN 3.7105 Sheets Titanium UNS R53400 Sheets ASTM B265 Titanium Gr. 12 Sheets ASME SB265 Titanium Gr. 12 Sheets |
 |
Titanium Alloy Gr. 12 Plates | Titanium DIN 3.7105 Plates Titanium UNS R53400 Plates ASTM B265 Titanium Gr. 12 Plates ASME SB265 Titanium Gr. 12 Plates |
 |
Titanium Alloy Gr. 12 Coils | Titanium DIN 3.7105 Coils Titanium UNS R53400 Coils ASTM B265 Titanium Gr. 12 Coils ASME SB265 Titanium Gr. 12 Coils |
 |
Titanium Alloy Gr. 12 Hot Rolled Plates | Titanium DIN 3.7105 Hot Rolled Plates Titanium UNS R53400 Hot Rolled Plates ASTM B265 Titanium Gr. 12 Hot Rolled Plates ASME SB265 Titanium Gr. 12 Hot Rolled Plates |
 |
Titanium Alloy Gr. 12 Cold Rolled Plates | Titanium DIN 3.7105 Cold Rolled Plates Titanium UNS R53400 Cold Rolled Plates ASTM B265 Titanium Gr. 12 Cold Rolled Plates ASME SB265 Titanium Gr. 12 Cold Rolled Plates |
 |
Titanium Alloy Gr. 12 Circle | Titanium DIN 3.7105 Circle Titanium UNS R53400 Circle ASTM B265 Titanium Gr. 12 Circle ASME SB265 Titanium Gr. 12 Circle |
Industry Application
Titanium Alloy Gr. 12 Sheets, Plates & Coils are extensively applied in extremely corrosive conditions in the below Industries.
Oil & Gas Industry
Petrochemicals Plants
Chemical Plants
Industrial Machinery
Power Industry
Paper & Pulp Industry
Food Processing Industry
Refineries
Products provided by GNEE
| Main Product | Common Grades (ASTM) | Standard Specifications | Common Surface Treatment |
|---|---|---|---|
| Titanium Tube (Seamless & Welded) |
Gr1, Gr2, Gr3, Gr7, Gr9, Gr12 | OD: 3mm - 150 mm Wall Thickness: 0.5mm - 10 mm Length: Up to 6000 mm (customizable) Standards: ASTM B337, ASTM B338 |
• Polished (Mirror / Satin) • Pickled • Annealed • Sandblasted |
| Titanium Sheet/Plate (Cold Rolled / Hot Rolled) |
Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Thickness: 0.1mm - 50 mm Width: 500mm - 1500 mm Length: 1000mm - 3000 mm Standards: ASTM B265 |
• Polished (No.4, BA, Mirror) • Pickled • Annealed • Sandblasted • Brushed |
| Titanium Wire | Gr1, Gr2, Gr5, Gr7 | Diameter: 0.1mm - 6.0 mm Form: Coil, Straight Length Standards: ASTM B863, F67, F136 |
• Annealed & Pickled • Bright (Clean) • Oxidized |
| Titanium Bar/Rod (Round, Hex, Square) |
Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Diameter (Round): 3mm - 200 mm Hex/Square Size: 4mm - 100 mm Length: 1000mm - 3000 mm (or cut-to-size) Standards: ASTM B348 |
• Turned / Peeled • Polished (Centerless Ground) • Annealed • Black Oxide |
| Titanium Foil | Gr1, Gr2,Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Thickness: 0.03mm - 0.1 mm Width: 50mm - 500 mm Standards: ASTM B265 |
• Bright Annealed (BA) • Cold Rolled |
| Titanium CNC Machining Parts | Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Capability: Custom components based on customer drawings. Processes: Milling, Turning, Drilling, Tapping, etc. |
• As-Machined • Deburred • Polished / Tumbled • Anodizing (Color, Black) • Sandblasted • Passivation |
