Titanium Grade 7 Alloy UNS-R52400 in the chemical industries
Oct 17, 2025
GNEE can provide the form
Gr7 Titanium Rod
Gr7 Titanium Pipe
Gr7 Titanium Sheet
GR7 Thin Titanium Wire
Titanium Foil Roll Gr7
Products Description
Titanium Alloy Grade 7 has outstanding corrosion resistance and useful strength at low density. A small addition of palladium has been made to this alloy for a substantial increase in corrosion resistance.
Typical Applications
Most of the applications of this grade are in the chemical industries. The most common uses are reactor autoclaves, piping and fittings, valves, heat exchangers and condensers.
Chemical Composition
ASTM B338 – Seamless & welded
titanium & titanium alloy tubes for condensers & heat exchangers
| Element | Titanium | Nitrogen | Carbon | Hydrogen | Iron | Oxygen | Palladium | Residuals (each) | Residuals (total) |
| % | Balance | 0.03 max | 0.08 max | 0.015 max | 0.30 max | 0.25 max | 0.12-0.25 | 0.1 max | 0.4 max |
Specified Minimum Mechanical Properties
(ASTM B338 – Seamless & welded titanium & titanium alloy tubes for condensers & heat exchangers)
| 0.2% Proof Stress | Tensile Strength | Elongation | |
| MPa | MPa | % | |
| Annealed | 275-475 | 345 | 20 |
Titanium grade 7 is a corrosion resistant alpha titanium alloy with similar mechanical properties to the commercially pure grades. It has a small palladium addition to improve corrosion resistance, particularly in mineral acids and strong brines. It is used mildly reducing or fluctuating conditions. At room temperature it is an alpha alloy. It transforms to beta phase at 913°C, and the alpha phase returns on cooling 890°C.
Titanium is reactive, with a very high affinity for oxygen, which forms a skin of very stable and highly adherent oxide. The skin gives excellent corrosion resistance, despite the reactivity of the metal. The oxide layer forms spontaneously and on exposure to the atmosphere. However, when new parent metal is exposed to anhydrous conditions or in the absence of air, rapid corrosion may occur. Care should also be taken if titanium is to operate in contact with hydrogen, as hydrogen embrittlement from hydride formation can increase strength, with loss of ductility.
Physical Properties
|
Density |
Melting Range |
Modulus of Elasticity (Tension) |
Specific Heat |
Mean Coefficient of Expansion |
Thermal conductivity |
Electrical Resistivity |
|
kg/m3 |
°C |
GPa |
J/kg. °C |
x10 -6 / °C |
W / m. °C |
micro-ohm.m |
| 4,507 | 1668± 10 | 103 | 519 | 8.41 | 11.4 | 0.420 |
Products provided by GNEE
|
Production Name |
Titanium Pipe/Tube |
|||
|
Grade |
Gr1, Gr2, Gr3,Gr4,Gr5, Gr7, Gr6,Gr9, Gr11, Gr12 ,Gr16, Gr17,Gr25 |
|||
|
Size |
All sizes can be customized |
|||
|
Application |
Metallurgy, electronics, machinery, medical treatment, chemical industry, petroleum, medical treatment, aerospace |
|||
|
Feature |
High corrosion resistance, low density, good thermal stability |
|||
|
Technology |
Hot Forged, Hot Rolled, Cold Rolled, Annealing, Pickling |
|||
|
Surface |
Bright, Polished, Pickling, Acid cleaning, Sandblasting |
|||
|
Packing |
Export Standard Woodcase |
|||
|
Delivery time |
10-25days according to the quantity and process of the product |
|||
|
Quality and test |
Hardness test, Bending test, Hydrostatic etc. |
|||
|
Product name |
Pure Titanium bar/Pure Titanium rod/Titanium alloy bar/Tianium alloy rod |
|
Standard |
GB/T 2965-2007 GB/T 13810-2007, ASTM B348,ASTM F67,ASTM F136, AMS4928,MIL4911 |
|
Titanium type |
Commercially Pure(CP) / Titanium alloy |
|
Grade |
TA1 TA2 TA3 TA4 TA5 TA6 TA7 TA8 TA9 TA10 TA11 TA12 TA13 TA14 |
|
Diameter |
3-350mm |
|
Length |
Max6000mm |
|
Technique |
Forging, machining |
|
Surface |
Acid surface or polishing, sand blasted surface |
|
Shape |
Round, flat, square, hexagonal |
|
Application |
Metallurgy, electronics, medical, chemical, petroleum, pharmaceutical, aerospace, etc. |
|
Grade |
GR1,GR2,GR3,GR5,GR6,GR7,GR9,GR11,GR12, etc. |
|
Standard |
ASTM B265,ASTM F136,ASTM F67,AMS4928 |
|
Size |
0.5-5.0mm x 1000mm x 2000-3500mm (Thickness x Width x Length) |
|
Application |
Metallurgy, electronics, machinery, medical treatment, chemical industry, petroleum, medical treatment, aerospace |
|
Supply status |
M (Y/ R/ ST) |
|
Feature |
High corrosion resistance, low density, good thermal stability |
|
Technics |
Hot Forged, Hot Rolled, Cold Rolled, Annealing, Pickling |
|
Surface |
Bright, Polished, Pickling, Acid cleaning, Sandblasting |
|
Packing |
Export Standard Woodcase |
|
MOQ |
100kg |
|
Payment terms |
T/T, L/C, D/A, D/P, Escrow, Western Union, PayPal |
|
Certificate |
ISO 9001:2008; The third test report; TÜV Rheinland; |
|
Delivery time |
7-15days according to the quantity and process of the product |
|
Quality and test |
Hardness test, Bending test, Hydrostatic etc. |
|
Product Name
|
Polished 1mm 1.5mm 2mm 3mm Nitinol Shape Memory Straight Wire Nickel Titanium Wire for Medical
|
|
Material Type
|
NiTiCu NiTi, Fe NiTi
|
|
|
Room Temperature(0C - 15C)
Low temperature (Below 0C) High temperature(40C - 120C) |
|
Feature
|
Superelastic or Shape memory
|
|
Standard
|
ASTM F2603-18/12
|
|
Surface
|
Natural Oxide, Pickled/Etched, Centerless Ground and Mechanically-cleaned
|
|
Condition
|
As Cold-Worked, Straight Strain Annealed and Shape Set Annealed.
|
|
Certificate
|
Transformed Temperatures, Tensile Properties, Chemical Composition and Customer Specific Requirements
|
|
Surface
|
Polishing, picking, acid washed, black oxide
|
|
Application
|
1. Medical field : with very good biocompatibility with human body, medical nitinol wire can be used in medical field.
2. Eye glasses manufacturer : Low density, high toughness, high stability, biocompability with human boday, nickel titanium alloy wire is becoming more popular between eye glasses manufacturers. 3. Fishing wire: nickel titanium alloy wire now is widely used as fishign wire because of its high strenght and very good memorability and superelastic. |
|
Processing |
CNC Turning, CNC Milling, Laser Cutting, Bending, Spinning, Wire Cutting, Stamping, Electric Discharge Machining (EDM), Injection Molding |
|||
|
Materials |
Aluminum: 2000 series, 6000 series, 7075, 5052, etc. |
|||
|
Stainless steel: SUS303, SUS304, SS316, SS316L, 17-4PH, etc. |
||||
|
Steel: 1214L/1215/1045/4140/SCM440/40CrMo, etc. |
||||
|
Brass: 260, C360, H59, H60, H62, H63, H65, H68, H70, Bronze, Copper |
||||
|
Titanium: Grade F1-F5 |
||||
|
Plastic: Acetal/POM/PA/Nylon/PC/PMMA/PVC/PU/Acrylic/ABS/PTFE/PEEK etc. |
||||
|
Surface Treatment |
Anodized, Bead Blasted, Silk Screen, PVD Plating, Zinc/Nickel/Chrome/Titanium Plating, Brushing, Painting, Powder Coated, Passivation, Electrophoresis, Electro Polishing, Knurl, Laser/Etch/Engrave etc. |
|||
|
Tolerance |
±0.002 ~ ±0.005mm |
|||
|
Surface Roughness |
Min Ra 0.1~3.2 |
|||
