China tantalum alloy for irregular applications Manufacturers Factory Suppliers

Tantalum Tube Pipe

Material: Pure Tantalum. UNS No.: R05200, R05400. Size: OD: 1.0~150mm, weight: 0.1~5mm, length: 10mm~6000mm. Purity: ≥99.95%, 99.995. Standard: ASTM B521. Condition: hard, semi-hard, mild

Potassium Tantalate Niobate Crystal

It has been known since the 1950s that potassium tantalum niobate crystals have a very large electro-optical effect; i.e., a large change in refractive index with a relatively low applied voltage. To

Potassium Tantalate Crystal Substrates

Potassium Tantalate, KTaO3 Substrate, KTaO3 Single Crystal is a novel crystal having a perovskite structure and pyrochlore, has broad market prospects in superconducting thin film applications. Since

Tantalum Sputtering Target

Tantalum (Ta) is a refractory metal that is critical for microchip architectures in the high-growth semiconductor industry. High purity Tantalum targets are used to sputter microscopic thin layers of

Tantalum Crucible

Material: Tantalum (99.95%) . Melting point: 3017°C　. Suggested filling ratio: 67~75 . Recommended to use under inert gas. Use in air or oxygen-enriched environments will cause oxidation of the

Tantalum Disc

Our tantalum disc is carefully handled to prevent damage during storage and transportation and to preserve the quality of our product in its original condition.

Tantalum Foil Strip

To avoid collision or damage to Tantalum Foil during transportation, it is usually wrapped in pearl cotton (Expandable Polyethylene) and then packed in wooden crates. This ensures the integrity of

Tantalum Wire

The pure metal is used in the electronics industry to make various types of electronic devices (e.g. rectifiers, capacitors, filaments, etc.). Tantalum is also used in vacuum systems because of its

Tantalum Foil

Tantalum foil and tantalum tape can be used in the following applications:. - Used in laboratory equipment.. - Used as a substitute for platinum.. - Used in the manufacture of high-temperature alloys

Tantalum Metal

Tantalum is chemically very much like niobium, since the two have similar electronic configurations and, due to lanthanide contraction, the radius of the tantalum ion is almost the same as that of

Tantalum Sheet

Tantalum is commonly used in high-temperature vacuum furnaces. In many cases, it is used not only as a shield or support structure, but often as the heating element itself. Depending on the size and

ASTM B365 Tantalum Alloy Rod

ASTM B365 / F560 Tantalum R05200 round bar is known for its resistance to acid consumption. It is not attacked by aqua regia at temperatures below 150 degrees Celsius. It is very flexible and can be