China tantalum alloy for polished applications Manufacturers Factory Suppliers

Tantalum Disc

Our tantalum disc is carefully handled to prevent damage during storage and transportation and to preserve the quality of our product in its original condition.

Niobium Ingot

Niobium Ingot (Nb Ingot) has a high melting point, excellent corrosion resistance, and good processability. It can be made into milled products used in pharmaceuticals, semiconductors, aerospace,

Tantalum Sputtering Target

Tantalum (Ta) is a refractory metal that is critical for microchip architectures in the high-growth semiconductor industry. High purity Tantalum targets are used to sputter microscopic thin layers of

Tantalum Ribbon

Tantalum wire and tape is corrosion resistant and has good thermal conductivity. Some of its uses are in the manufacture of heating elements, vacuum tubes and other high-temperature components.

Tantalum Flange

Tantalum is also commonly used in the nuclear industry, e.g. for components of nuclear reactors, as it is more resistant to radiation.

Tantalum Crucible

Material: Tantalum (99.95%) . Melting point: 3017°C　. Suggested filling ratio: 67~75 . Recommended to use under inert gas. Use in air or oxygen-enriched environments will cause oxidation of the

Tantalum Tube Pipe

Material: Pure Tantalum. UNS No.: R05200, R05400. Size: OD: 1.0~150mm, weight: 0.1~5mm, length: 10mm~6000mm. Purity: ≥99.95%, 99.995. Standard: ASTM B521. Condition: hard, semi-hard, mild

Tantalum Foil Strip

To avoid collision or damage to Tantalum Foil during transportation, it is usually wrapped in pearl cotton (Expandable Polyethylene) and then packed in wooden crates. This ensures the integrity of

Tantalum Wire

The pure metal is used in the electronics industry to make various types of electronic devices (e.g. rectifiers, capacitors, filaments, etc.). Tantalum is also used in vacuum systems because of its

Tantalum Metal

Tantalum is chemically very much like niobium, since the two have similar electronic configurations and, due to lanthanide contraction, the radius of the tantalum ion is almost the same as that of

Tantalum Sheet

Tantalum is commonly used in high-temperature vacuum furnaces. In many cases, it is used not only as a shield or support structure, but often as the heating element itself. Depending on the size and

Tantalum Bar

With its high melting point, hardness and low coefficient of thermal expansion, Tantalum excels in demanding applications such as electronics, aerospace and medical devices. Backed by our commitment